In the Edit -- Extend -- Extend by Distance command, check the "V" option (per the Command Help):>V - Vertex mode Toggles insertion of co-li...

One thing I might periodically do is to remove the batteries from the collector and then press and hold the Power button for (say) 20 seconds to disch...

> Ladd, would a corrupted surv.ini file do this?Doubtful. It's possible a recent Windows update or installation of a different Windows application ...

You could try changing your default screen resolution to some temporary alternate resolution to see if the dialog comes back or possibly try the sugge...

I'm fairly certain that in Carlson 2014 and earlier, you'd need to physically scale your drawing content by your Scale Factor to account for Modified ...

> According the the info on Carlson's site, the Surveyor2 has a magnesium housing.This is a mis-quote from the Surveyor+ page that (I believe) has ...

On the old computer, issue Survey -- Draw Field to Finish -- Edit Codes/Points -- Code Table Settings. Check the Max Length for Linework setting. As n...

> (5) Are there other training sources that you recommend that I have not listed above?One resource I point out to my clients is the now freely ava...

You might try keying in MENU at the Command prompt and re-loading ICADBASE.mnu. Another option would be to right-click on the Command prompt area and ...

I believe this is/was a bug in the early versions of the 2013 OEM product that I believe has been corrected with the current build of the product. My ...

>If you've got a drawing set to State Plane and you set the Project Scale Factor in the drawing setup screen to anything except 1.0, the Label Lat/...

> Does anyone have an example of a code list used for F2F to the National CAD Standards?Several years ago, I adapted the codes specified by the Iow...

If you use the Carlson "Start-up Wizard" interface, it will default to the SURV.dwt template as found in your local settings path (you can locate this...

>Where can a guy find the instructions and examples for this new cool export?3D PDF generation is a function within the Carlson CADnet module.See t...

If the commuter license happens to be "stuck", you might also explore:Carlson Knowledge Base Topic Id 420and/or:Carlson NLM Troubleshooting Topics

> There is a very small body of water that runs through the property. When I say small, I mean step across the channel. Not hop or jump, but step...

> How do I make points or lines "bold" or "highlighted" when dragging the cursor over them?You probably want/need to set the SelectionPreview varia...

>I should've pointed out the Object Grouping check box as you have, but I was trying to provide a quick solution.I never knew about the Ctrl+H shor...

For future reference and the sake of the discussion, the PICKSTYLE variable (Ctrl+H for applications that support this mnemonic accelerator) is contro...

Look under Settings -- AutoCAD Options. Visit the Selection tab and clear the Object Grouping toggle: