@dhunter?ÿ The International Mobile Equipment Identity (IMEI) number is a unique identification or serial number that all mobile phones and smartphon...

@lukenz?ÿ Collimation routine in Topcon must differ from your equipment. As we only need to site an object near 90?ø from zenith,?ÿ then flip the sco...

I was taught for tight verticals a collimation check is required after 15?ø change in ambient temperature. This may require a check a couples tines a ...

@jitterboogie?ÿ Yes, it is. That last project I checked anchors bolts on was a hospital. The project surveyors report called bolts out of tolerance b...

@fairbanksls?ÿ This a problem is our profession. Very few surveyors are willing to do construction layout. Which has forced contractors to purchase e...

@ars-mine-surveyor?ÿ Only 3ft, not my standard practice for NY rural surveys.?ÿ That old shed on neighbors parcel should have an offset to boundary l...

I thought the same! Also why did they show offsets to structures more than 70ft from boundary,?ÿ while not showing adjoiner structures less than 30ft...

Boundary work in that part of the state is unique. This plat is a fine example why. It shows No bearings or azimuths. Just two interior angles. It's ...

The P4RTK controller is using an embedded version of of Ground Station software.?ÿ You can purchase Ground Station Pro to use on the P4Pro controller....

@ramses?ÿ Go to 2m:19s in this video. See if this works.

@ramses Next time you are in rain, just put the Toughpad in a clear plastic bag.

Look for "Dashboard for Panasonic PC" Then you will see "Touch Panel Mode"

@ramses?ÿ It is already installed on your Toughpad. No need to look on a website. Look in the Windows start menu.

@johnymal?ÿ The GCP's are for ground truthing only,. These are a check on the PPK.

@johnymal?ÿ Suggest you get comfortable post processing PPK.?ÿ Do you have a VRS in your area? Is cell coverage good in your area? You still need ...

I added BATAM PPK to a P4 Pro 2.0 and would not recommend it. Add ons are cumbersome and rob too much flight time. You want to buy it? It's been on th...

Topcon Magnet field will properly use the pc of -34.4mm. I think Carlson's support is telling you that most instruments really can't measure less tha...

Microstation has a true auto save. It writes to the drive upon ever key stroke. Therefore you can work all day without hitting save and if the power w...

Please do ask for education, training, and support. There is no place in Florida where the grid/ground scale factor would equate to 0.23' in 600', tha...

Masonry Hammer - great for reconn and control points. Can dig down a few inches through asphalt and hard ground with ease.?ÿ Disto are cheap now. Gre...