Last seen: April 9, 2026 12:14 pm
You need to open the drawing in C3D and EXPORT it to Autocad 2007. Using a saveas command to save as an earlier version will still keep the C3D objec...
Any version above 2009 that is running the Autocad OEM will import dgn files.
The "car" is a Ford Edge. I know that because I just purchased two weeks ago. It is a little limited on room but for the majority of surveying tasks...
You wouldn't need map since Civil 3D is built on top of Map and Autocad. You should have all of the map commands available in C3D.
The review and recordation fees would be more than $475 down here. I'm sure the attorney who draws up the deed is charging more than that as well. "M...
Yes, under the coordinte file utilities, there is a routine I used all the time to rotate and check alignment of platted points versus filed shots. H...
If the file isn't too big, send it to me and I'll convert it to native autocad objects. It usually is from xref files not bound to the drawing.vals286...
You'll love Carlson once you can get familiar with the program. Setting up the field code library will be easy. Just remember sets are 3d polylines, ...
Which browser are you using? Try using a different web browser instead of internet explorer.
Carl, Are you running Windows7? If you go to the printing preferences in the control panel for the PrimoPDF driver and click on the advanced button, ...
Because his Grandfather who was running this mine before him told him so. I cringed as welll when watching that episode. He knows there would be more...
There are xrefs that weren't bound to the drawing.
AUDIT the drawing
Check your fill command.Type FILLturn it on
Being that the load was 2' too high, and too heavy I guess the demo company that hit it was just trying to get some new business.
" Thank you for your interest in our sevices. Without knowing the address of the property in question, my hourly crew rates are $xxx and my Licensed ...
Use the import command to read in the dgn to dwg.
If you have any Autocad version 2009 and up, you can direct read microstation to dwg using the import command.
DJ, It should be any day now. When I passed in '06 I found out on 12/19. Just keep checking the regulant lookup page.