Hi folks,Thanks for all the information. It is real helpfull. I do need to buy a new desktop especially if my plan to get into UAV's comes thru. I wil...

JohnI have both. A Trimble GPS R6 rover and a Leica 1205 Robot. Some times the robot stays in the truck and sometimes its the GPS rover. It depends on...

JBStahl, post: 326755, member: 427 wrote: Love my Surface Pro 3 i7 8Gb 512Gb. I've set up with a docking station and two 24" monitors (3 including th...

Frank Willis, post: 326781, member: 472 wrote: They are going to an annual fee of at least 140 per month. I hope Intellicad is getting more stable. C...

I mount the Seco Truck rack on the drivers side, mount the R6 on the rod in the rack use continous topo on the TSC2 with a 20' interval and drive slow...

Dear Mr. PenryWhat is the length of the road project and what kind of major incentive are we talking here?Bob

Hi Jim,I used a can of compressed air from my camera bag that I use on my lenses once in awhile. I try not to get to the point of blowing condensation...

I just had the keypad replaced on one of our TSC2's and paid the $700. These controllers are 5 years old and the replacement was the keypad and the sc...

Afternoon,I looked at finding a cheaper version of the GEB batteries but was told to stay with the original Leica batteries. FLT Geosystems in Florida...

What about either using some old 4' sections of range pole screwed together with the GoPro mounted on top or maybe a extendable level rod?Just a thoug...

I'm with AndyWe set alignments and stationing South to North and West to East keeping North to the top or right side of the sheet. I try to do this as...

Hi Thad,What kind of UAS did you use? What kind of camera and did you preset photo ground control? Was this Pix4Dmapper Discovery?ThanksBob

Hi guys and thanks for the responsesI don't have a issue with spending the bucks for the Leica batteries. I was just looking to see if there was any a...

During warm months, I have a Springfield XD 9mm in a 4" barrel riding in a Blackhawk Sherpa under a ex-large shirt. Cold weather times I have a S&...

A most important fixtureHi William,The box I had in the old Surburban was made out of 3/4 marine grade plywood. That sucker is real heavy. It took 4 o...

A most important fixtureHi Paden,A guys got to eat when doing some carpentry. I did manage to take the beer bottle out of the picture before I took it...

New Truck Box CageHi guys,I thought about a cage but I used all of the available space for equipment. The one thing I have left to do is add a top on ...

Big,I'm kind of a neat freak when it comes to a clean truck. The first firm I worked for never gave us any time to clean out the truck or dump trash. ...