Would anybody be able to email this to me thanks powersurveyireland@hotmail.com
Connect to the receiver using bluetooth or serial port. Once connected go to status and then go to the logging tab. You can then enter the antenna typ...
Scanning targets and working from the whole to the part. Continue to use the surveying principles you use with other equipment. I have only done a few...
There should be a backup file created at intervals while you were working, look for them, probably labeled .bak
Posted by: A Harris Was taught that an invert was getting a reading when the level or prism rod was being held upside down. That would be an inverse l...
Not sure what brand of TS you use but with my older Topcon the relectorless beam gets wider as it travels away from the ts. Also the higher the angle ...
The free version doesn't allow for registering but you can view, measure, index for Autocad and switch between viewing modes. I find it quite useful a...
I don't do drone work but I recommend it to clients for viewing point clouds and taking measurements as it is free and they can import the same .rcp f...
Anytime this happens a reset through Topcon Reciever Utility sorts it out. Happens every month or two. There are a few reset options in TRU, try them ...
Posted by: polygoncateater How would I use the controller as the memory? Package came with 2 fc-100's and a tsc2. By reading the posts above!
Posted by: leegreen Can log static data to the controller using: PCcdu, CEcdu, TRU, TopSurv or Magnet Field Topsurv does not allow recording of static...
This is what I done after my Topcon dealer incorrectly told me I needed to upgrade my data collector to get an update geoid file. If you download Magn...
You can record static data to a data collector using Topcon Receiver Utility which is free. You don't need any memory activated on receiver.
I am using Carlson Survey 2011 Intellicad. I will be cross grading to the embedded version this year. Too many small differences and issues with Intel...
When I first saw it I thought it looked ridiculous, but I imagine once you start using it you would never go back. I would say there are alot of peopl...
We use this software all the time paired with a bluetooth disto- We generally survey as much as possible with the total station and fill in the gaps ...
Do they expect every point in the point cloud to be within 1/4"? Good luck extracting all the noise to get to those specs.
Posted by: Loyal Posted by: Totalsurv When I import the .tps file from the PGA1 it doesn't bring in the antenna type just the slant height and I have ...
When I import the .tps file from the PGA1 it doesn't bring in the antenna type just the slant height and I have to manually change it. When I import t...
