Back in the day we had a "photo mylar " from the print shop, can your print shops do this ?

"While your out here can you ........"

In civil 3d you can create overlapping "PARCELS" as long as they all on separate "SITES"autocad stores the data in the .dwg file

all urban work, the nissan nv200 has been great for the past year

last year I tried 2 different laptops that had discreet graphics (2 graphic cards) (for gamers) and neither one worked with autocad 16/windows 10. Th...

I submit the LOMA with the BFE blank on these types of lotsfema will calc it

I had the same thing happen with an autocad civil 3d program called SINCPACHad to get a fresh authorization code on two machines

3d object ?you check it with the hatch command hatch, hatch properties

My 11x17 hp laser cost 6 times more than my 11x17 brother inkjet.The laser is w.... a.... y better and worth the $$$

I use this service for $35 per month

I too run win10 pro autocad 16 and a t620 plotter the t610/620 are listed in this file hpdjt1100serieswx64gl

I was taught that contours had to be accurate to within 1/2 of the contour interval.to meet this requirement - larger intervals = less shots

my guess is that a fence builder disturbed it and 'put it back' and poured the footing

My surveys have an "OFF" point group - these are control points etc, things that are not on the published map.before sending my dwg out to others I "...

Joe the Surveyor, post: 370357, member: 118 wrote: Thanks for this. I'd like to figure out a way to insert photo's right into the document. Any idea...

attached here is a version I created (I used adobe live cycle and acrobat pro to do this)its fillable and works but could be better with some fine tu...

c3d labels DO have leaders if in a 'drag state'c3d labels currently cannot have more than one leaderthe MLEADER command in autocad is different, it ca...

my civil 3d crash experience 2008 1 per hour2009 2 per day2010 2 per week2012 1 per month2016 never

Whatever you decide get the exact same model, otherwise its wonky when going from one screen to the nextmaximiize windows go of the edge of the screen...