P Perkins,You will need to load the new Measurement Engine FW version 3.883 on your ATX1230 GG antenna. You can download the needed files from Leica ...
Joe,It looks like they do indeed have a replacement part... The part number is D11271 - Snap-Loc Button Kit... if this is inded the part you are tlak...
Joe,I will look at the shop drawings for this pole and post if there is a part number given.
Mag-Eye,You should be able to just copy the folder that was created for the job that you now have backed up on your PC back into the DBX folder on the...
Mag-Eye,All of the previous explanations are spot on in information.If you do not see the file when using the Choose Working Job option...There are 3 ...
Radar,Yes the current gear is Wifi compatible if you purchase the CS controller with the built-in GSM modem. There are two models of the CS15... both...
Radar.Unfortunately the RX1250 did no have any physical WiFi device built into it. The port on the bottom of the collector could be used but would be...
Fattiretom,I have been thinking about your issues. I am not sure about issue No 3 but this is what may be the causes….1. I need to test this with t...
Squowse,The images are always stored under the job folder in a sub-folder called Images. So say you job was called "My Topo 1" the pictures would be ...
Derek,There were updates for many issues from Jumiper Support. You need to reasearch and install the needed patches. There were definitely some that...
Coady,Yes this will work. Let me know if you need help with the settings and needed software for configuring the radio pod.
I have it on my list. I would really like to get your opinion! We have it loaned out right now for evaluation with a customer. As soon as I can ge...
Agreed... just have to put out list price.
The instrument list price is $ 47,500 and that includes dual keyboards and all of the bells and whistles for the physical instrument. If you install ...
Tom,There are a few ways to do this with SmartWorx. One is with the RoadRunner program and the other is Reference Line. You can actually slope stak...
I think everyone who has responded has covered the GeTac better than I can. I have seen other long range Bluetooth (LRBT) radios work with the RH16.S...
Yes, The RH1200 will connect to the Allegro Radio Pod. The RH1200 will but unless the newer Allegro's had a different radio avaiable the Rh1200 wou...
NewtoCO,There are quite a few options to export the data from the CS15 controller. If you just want an ASCII file the options will depend on the vers...
husersurv,The allegro worked well with the TPS1100 series. I have a guide for connecting the Allegro and TCPS27 Radio. Here is the radio compatibilit...