If you run 2014.20 or higher you no longer need the construction instruments code

Think You got a bad demo.Using Measure Codes joins lines instantly and you start a new line by just hitting a + button to increment the string. If yo...

The instrument stores the collimation values. If you look at them via the small S6 screen the units are in GRADS. Chances are your units on the TSC2...

you will need to get the 4700 to a dealer. they should have an old dos program called G2APP which is needed to add files to these old receivers. it ...

expand the sessions section in the Project Explorer. Select all the sessions required for time editing and right click to get PROPERTIES. You will s...

the dealer might have upgraded your access version when doing the screen replacement. There are definately stakeout delays in versions from around 20...

1. Connect power to TT450 radio and connect radio to PC using data cable.2. Open ttsetup program and connect to radio3. Once PC has communications wit...

the zephyr 1 is meant to be GPS only. you arent using the internal antenna of the GEO are you. check the survey style to confirm that.

Survey COntroller and its license will be reomved. definately write it down. after teh reset windows will still be there and reinstall SC from trimb...

you need to have data logging enabled in both devices. this is not turned on in most cases as the SPS is construction equipment and you need to speci...

When keying in the point change the quality to control by clicking on the ? in the Add Coordinate box. If you only have 1 keyed in control point that...

Trimble Survey Controller or Access can not operate any non trimble GPS

You can use Trimble's RTX post processing service from inside TBC 3.1Just log 1 hour of static data and you can send that straight away to RTX through...

You can force the .t02 in TBC to become a continuous survey so if processed against a CORS each epoch will have a position. This function is nicely h...

R8 Model 1 came out in 2004 before trimble even supported GLONASSthe hardware inside was a gps only board that could track L2c to make it different fr...

Trimble Business Center has a Geoid Subridding feature which will do exactly what you want. Looks like you need a license to run that feature on V3.1...

Take a look at the file config.cfg on Access or sc12xx.cfg if you are on Survey Controllerit lives in the login directory name for Access or Trimble D...