I would get a video card and at least 12gb of ram before a SSD

Survey pro has a pretty nice leveling module

If it was set up through a big tempature change I would assume that is the culprit I don't know about Trimble but our Sokkia will go way out of level ...

Thanks, I must have some other issue.

I tried both 32 and 64 I was thinking it would also recognize microstation but no dice.

I was hoping someone had a workaround and maybe since they are both DWg native it would work.

Sorry the wording was cannot find a target program.

You can add points to a surface in Carlson it's the modify surface menu it would be tedious for more than a dozen points though you can also add and e...

Carlson GIS will handle a google earth image nicely.

The Sokkia digital levels do have a wave and read function can be used to 50meters.

Have fun calling Trimble without a service subscription.

I know in Carlson in intellicad one option when you do a polyline is c for continue then you select the line to add on to

I like the blue Phillips head tapcon screws. Take a 5/8" bit drill a 1/4" deep hole then run the 5/32" bit to depth of the screw and it makes a nicely...

I am pretty sure you can get a liiuminated level rod from Nedo.

Did you check your special codes.

I run 2 32" sharp LED TV's and it works very well. Make sure if you are doing TV's get 1080 p as 720 looks terrible

I always thought Others would be a good name as in Monument set by Others

7" landscape spikes, Milwaukee m18 hammer drill with a 3/8" bit the hole will leave just enough room for a pin flag with a 4ah battery we get over 50 ...

We own a SRX and an SX they are good guns they seem to need to be adjusted often but if your aware of it it's not a big deal 5 minute process. I do no...