I got into a mess of those little ticks yesterday. I scrapped them all off and the floor looked like I shook a pepper shaker. Now I'm covered in littl...

We seem to be staying pretty busy. I got two decent surveys in yesterday and just bid on an ALTA that would keep us busy for a few weeks. Fingers cr...

Tom,I am sure I know who you are speaking of. He would plot out a deed and make it look real good but the "survey" (and I use the term extremely loos...

I agree all three need a plat of survey. I would hope that in scenario three that you would actually set up a gun and check the pins to be sure that t...

I have used Lieca, Trimble and Topcon. I personally like the Topcon GR-3 and the GRS-1. The GRS-1 is the best network rover I have used. It works w...

I got it.Thank you anyway!Matt

Thank you!Thank you for the responses, but the data I have is unusable due to short observation times and heavily wooded terrain. Thank you again!Mat...

I will post sketches after I complete my traverse. It looks like I will not get back to this job until late next week. I appreciate the input and hop...

Check and see if you are in course of fine mode. That will make a difference.Matt

I have had that happen before. What I have done is open a new drawing and copy and paste everything from one drawing to the other drawing and it has ...

You don't need two receivers. The one you have will work fine. You will need to download data from a ngs base station. Most of them have data you can ...

Depends n occupation. If the pins have been relied upon by the adjoining owners then the pins hold over original intent. A surveyors mark even if it w...

No I have tried the gender changer adapters and they do not work. I have a usb to serial adapter and a 9 pin to 9 pin null cable and it works fine.M...

I would look here first. If there are none shown I would list this as the appropriate athority. National Wetlands MappingMatt