Notifications
Clear all
Marc Anderson
Marc Anderson
@marc-anderson
Member
Joined: August 8, 2010 9:02 pm
Topics: 22 / Replies: 435
Reply
RE: Can not calculate area of that polyline why?

it's probably a 3D polyline. Change it to a 2D polyline and it should work. Also, I would be reluctant to use an automatic description writer with a 3...

2 years ago
Reply
RE: Do you rehab monuments?

If it was my own, certainly....Someone else's maybe, but usually not......

2 years ago
Reply
RE: Does everyone deserve to own land?

You can't prevent the rain from falling..... It will eventually find it's way back to the sea, carrying with it small amounts of whatever crap it's pi...

2 years ago
Reply
RE: What Does a Note like This, Mean to You?

@bill93 Why would you need an "alternative" to recoded-measured?

3 years ago
Reply
4 years ago
Topic
Replies: 2
Views: 152
Reply
RE: No BFE...now what?

clearcut, post: 439033, member: 297 wrote: While Section E may be used for Zone A, be aware and also be sure to educate your client as to why the inst...

8 years ago
Reply
RE: Win XP Win 7 Win 10

I upgraded my Windows 7 to 10 this past weekend. Figured it was now or never since the upgrade is free until the end of the month and Microsoft plans ...

9 years ago
Reply
RE: Magnetic Bearings / Sanborn Maps

Sanborn's are pretty standard reference sources for folks doing Phase I Environmental Site Assessments. They were used to evaluate Fire Insurance risk...

9 years ago
Reply
RE: July 2015 Photo Submittal

Geoff Ashworth, post: 331131, member: 47 wrote: I had to shoot a section corner on State Street in Madison, WI. State Street is a pedestrian mall now ...

10 years ago
Reply
RE: After Acquired Title

Try this document. Seems to explain it in detail.

10 years ago
Reply
RE: Cut "X" Set (or) Mag Nail Set in concrete

I'll either use a cordless 18V drill with a masonry bit and set the nail in that hole but it's not countersunk and may chip off with a snowplow, or I'...

10 years ago
Reply
RE: Radius of bubble in subd.

Architectural Graphic Standards has cul-de-sacs as 35' (small) and 50' (large), so 60 feet would probably be fine if it doesn't have to meet any juris...

10 years ago
Reply
RE: WSJ Benchmark Hunters Article

As I said in my comments on their website, this is still a vast improvement from the activities of the amateur GPS crowd a few years ago that recovere...

10 years ago
Reply
RE: Zoning Report

If the report is to attest to compliance or non-compliance, that is not a matter of survey.Compliance is either a legal opinion or a determination by ...

10 years ago
Reply
RE: Least Squares Adjustments

Ditto Moe's response.....

10 years ago
Reply
RE: FEMA

FEMA - NFHL

10 years ago
Reply
RE: Cut throat tactics

Seems like this just happens all the time around here....I've unfortunately come to expect it.

10 years ago
Reply
RE: Feet from north line & feet from west line

I agree with the others, that's boundary surveying. In addition to unlicensed practice, are you insured to establish boundaries?What if something goes...

10 years ago
Reply
RE: VRS Question

I think it depends on how it was set up. The Trimble one Seiler set up for Missouri had to be good for ten miles outside the state. A lot of the Illin...

10 years ago
Page 1 / 23