When you first setup a base, all the software I have used checks to see if the Lat/Lon manual in the software is within 500m of the current Lat/Lon po...

Virtual Surveyor is software to extracts?ÿbreaklines?ÿand 3d terrain data from a point cloud. I use TopoDOT for this, but that only work inside of Mic...

I'm pretty sure?ÿJavad DPOS only works with Javad files. Are they accepting RINEX files now? Sounds like the OP is using Trimble.

15Gb per month, on average?ÿthat amounts to only a project and a half for me.?ÿ Appears to be a new product or service??ÿ

In order to check your vectors, you want at least 3 receivers collecting data simultaneously. This way you have a triangle to check closure. After all...

I suggest you do as Mark has described with GNSS receivers at 5-second epochs, but do not process all with OPUS. Send OPUS only the points in open sky...

No, that is not the way it is supposed to be done. What is your intent? Do you want 3d surface for an excavator, or 3d linework or both? Why work with...

Great!

Very common mistake. 3.7 ft is the difference between NAD83 and NAD83_NO_TRANS. You should always use the later with a Network GPS.?ÿ

The attorney did back down and remove three certs. He removed the two other attorneys and the title insurance company LOL. Still no bank. Client just ...

Yup, either that or they just don't know Jack about their own software. This is not a new setting, it has been an option in every version of the softw...

Try this. Go to Configure > Global?ÿ Toggle on Full Screen Also while at this?ÿsame location in settings, bottom?ÿof window,?ÿthere is Color Scheme...

Send your files to me and I will process using my license of Pix4d for a fee of course. What is a reasonable?ÿfee for using my hardware and software? ...

Seems the problem only exist when using US Feet. In Tools v5.0 the software will export the X and Y in US Feet, while the elevation was in meters. I t...

Could argue the Pilot in Charge was flying over people who where not involved or notified of flight plan, and they reacted.?ÿ

In Tools version 5.0 all exports have a bug. It sucks. Elevations are in meters while x,y in feet. They issued an update v5.0.1. and it still has the ...

My experience?ÿhas been much like John has explained. I have worked on several?ÿEnvironmental?ÿcleanup projects and Soil Stabilization projects in Ont...

Try it. It creates infinite lines in map view. No snapping. You then walk to grid intersection. Show live coordinates, move pole to intersection and s...

In Magnet create grid lines, not grid points.