The very first sentence is missing a key element. 1.5 acres (more or less)...... 🤔

I would use that program. I am old school and have a healthy distrust of Acad files. Many times I have picked off some bldg corners and checked the se...

So reading this post reminded me that it was time to check the calibration on my trusty Leica TS15-P. L & T = 1" i = 0" c = 1" ATR = 0". Dam...

@field-dog 464MHz is the radio frequency I use on the base station 🙂

We have a large data base dating back to the 1960's with many points and maps tied into the state NAD83 network including PLSS points. Whenever a new ...

CSV files are just text files. Double click a csv file and it will open in notepad. Right click it and pick Excel from the dropdown list if you want t...

Exactly what we do. All of our Parcel Maps and ROS Maps are tied to NAD83. Those NAD83 coordinates make it easy for the next guy to get within a foot ...

Well you just proved that it's better to be lucky than good 😉. Really tho, nice job with the calcs.

Getting different results in a certain area between VRS and RTK does not mean that there is a problem with a reference station. Check your satellite m...

When I plot those UTM coords in Google Earth and again in my Garmin I get zone 18 not 17. I am going to make an assumption here that the coords are gr...

Well ya gotta love it. Artificial Nonsense at its finest 🙂

And that is when rolled curb came into use on a lot of our flatter subdivisions which eliminated the curb cut problem.

Flipping the garage could cause a problem with the driveway so the chief needs to be reminded to check the driveway percentage before any staking.

You said that looking thru the scope the cross hairs were dead on the prism so it is tracking and aiming but not measuring the distance. IMHO the prob...

I would find a good spot with open sky 800-1000feet away from all the action and vibration for the base station. If this is a long project then find s...

p>This link will take you to a webpage where you can find the grid number you need and then download the bin file. My Fieldgenius software uses the be...

This 30' radius curve is perfectly tangent to both lines. See attached. The data calcs out tight just like Gary G. said.

I ran the bearings and distances just like they show on your map and everything closes using 90 degrees for setting the 30' radius point. The map is g...

Yes we create new job numbers based on the new client (owner) of a property we worked on but we show all of the previous job numbers for that particul...

You are correct. I set 2 points 10.00' apart on my level driveway. Used my Leica TS15 and a Leica round prism on a tripod with a tribrach and measured...