I used those two commands today. It worked very well for both points and surfaces.
> Trimble Survey Controller or Access can not operate any non trimble GPSHowever it will operate some non Trimble total station brands.
> DOT estimated a 15% cost increase to do a job in metric compared to using feet for the same job, which is the main reason metric was discontinued...
In 2008, a similar issue happened to the Leica 500 systems. Patch was made available on-line without maintenance contract. I would hope that they will...
Here is a link to the surveyor's story:Surveyor's trip to Marsand one from scientist crowd:NASA Imperial & Metric...And as the heavy duty mechanic...
Thank you, that is simple: the enabler matches the installed version. I run AutoCAD 2014, I need enabler 2014. Will try this.
Does it also apply to the GPS900 model?
does the enabler have to match the year of the drawing? I recall looking into these enablers and there were quite a few, making it confusing to sort. ...
Metric is the way to go, if working with global clients or simple approach. 1 meter = 100 centimeters = 1000 millimeters. When you walked one short ki...
In the end Jim I am going the DC route. It will be a lot easier for the guys to stake a line with SurvCE. Just have to remind them not to drop the cab...
> JFGI - you will find many possibilities. Some are free downloads. Others are online converters. My experience with conversions is that some of...
We are getting a couple of summer students, so I am looking at the simpliest safe job procedure and resources requirements to help the guys successful...
AutoCAD does snap to vector PDF (as opposed to scanned raster PDF) line work. It is kind of handy as a QC tool for layout data prep. I watched the Car...
Found it I think. Instead of stakeout mode, going in data collection mode should do the trick. Point to line measurement (7-18, instruction manual)In ...
As a QC procedure, may I suggest you have a look at that Carlson to Trimble *.ttm file. I seem to recall loss of fidelity for the more complex 3D mode...
If you have access to TBC, I would suggest bringing in the LandXML file and create a *.ttm for the DC.
Get a 5 dBi gain antenna (old style Trimble 4700, 5700), get a bracket sold by Seco. Use the rubber duckie 0.5 dBi antenna. When you loose radio, swap...
> I have an Epoch 25 base w/ Zephyr Geodetic here that I use to collect static data and postprocess using OPUS. While the Epoch 25 base is fine for...
> No. 8: Autodesk> Median salary: $128,000> Number of employees: 7,300> Sector: Business services> Headquarters: San Francisco> >...