Activity
 
Notifications
Clear all
chris-mills
@chris-mills
Member
Joined: March 6, 2012 10:30 am
Topics: 9 / Replies: 709
Reply
RE: Precision Levelling

On the subject of tilting levels and vibrating bridges ... A similar situation arises when you need to measure things on an unstable platform. Several...

10 months ago
Reply
RE: Precision Levelling

Optical levels have one great advantage over digital ones - they have no time limit on reading. Even if there is a great deal of interruption to the s...

10 months ago
Reply
RE: HP Handheld Conference 2023

@samthesurveyor Same here, several times a day!

2 years ago
Reply
RE: Rake/Battered Pile Survey Procedure

On the rare occasions I've been involved the piles were close inshore (within 50 metres). The rig frame was set to the required rake. We then used two...

2 years ago
Reply
RE: Spaghetti Harvest in Great Britian

I remmember that! Even as a ten year old I twigged it was April 1st., but it was amazing how many "grown ups" were fooled.

2 years ago
Reply
RE: In my time as a surveyor

Those of us who started in the 1960's (apart from chains, remember Tellurometers?) have one great advantage over those who have learnt in the electron...

2 years ago
Reply
RE: Accuracy comparison test - RTK vs GCPs

I have noticed the rounding of horizontal edges, typically what I've seen was a few cm up to a decimeter and since it's not practical to set GCPs alon...

2 years ago
Reply
RE: Accuracy comparison test - RTK vs GCPs

You would expect that significantly more points would be required to hold vertical accuracy compared to horizontal accuracy. The advantage of using GC...

2 years ago
Reply
RE: Detail requirements for an ALTA of a refinery

I've worked (and helped on the design) in a number of refineries over the years. Not being in the USA I can't specifically comment on the ALTA require...

2 years ago
Reply
RE: Surveys, Guns, and Racism ... Oh my!

I'm pleased I'm on this side of the Pond and not over there! Looking at this from an outside perspective and from where compromise on the findings is...

2 years ago
Reply
RE: Best units for tree canopy

Some of the slowest places is between 2 buildings, and the like. Which is what you would expect - building lines define an "absolute" canyon, outsi...

2 years ago
Reply
RE: Moasure

All these devices are a real threat to our industry. It's not the devices which are a threat - its those who buy them and misuse them. The firm is...

2 years ago
Reply
RE: Difference between nadir for drones vs crewed flights

I see both nadir and off-nadir used in drone mapping.?ÿ In fact, I often see it recommended that some off-nadir shots be included in a drone mapping s...

2 years ago
Reply
RE: LF Tips on setting up a precision prism carrier/ traverse kit with level vial on tripod efficiently

Follow Dave Karoly method, but at item 2 if you want assurance, drop a small stone to check head is near enough plumb. If it isn't move ALL THREE legs...

2 years ago
Reply
RE: Cheaper than a shiner

Our coach bolts are the round headed type - probably only about 3mm. above the surface.

2 years ago
Reply
RE: Cheaper than a shiner

The cost of markers is negligible compared with the cost of survey, unless you are undercharging! For anything which needs to remain for the long ter...

2 years ago
Reply
RE: WEATHER

Here in NE England we rarely get long periods of anything - although we can get 4 seasons in a day! My basic rules are: a) Can I get the quality of ...

2 years ago
Reply
RE: Anyone Remember the 1977-80 AGA Geodimeter 12A - EDM?

I have a couple of 120 tucked away in the store - must dig them out and see how they still work. With a triple prism they were good for up to 5km., lo...

2 years ago
Reply
RE: Constructing Staking

Only 147 times a day??? You really do need to learn how to upset them properly! That's only 12 times an hour - once every 5 minutes. How did you spen...

2 years ago
Reply
RE: What special skills make you exceptional?

I have this exceptional skill of starting to read posts on Surveyor Connect and then realising that the rest of the day has passed me by.

2 years ago
Page 1 / 36