I was running into this problem as well, same radio but running R10-2 base. I have found that even when plugging in with deep cycle battery the base ...

@lukenz   I would say very heavy traffic, even on high volume with the 52 is difficult, same with the spot, but most situations the spot vo...

Glad this was posted! I actually bought a spot about a year ago after working the prior 12 with the GA-52cx. The volume control was not a deal breake...

What kind of “gaps” are we talking? Minimal or major? If major, sounds like a deed issue…The bounds and monuments of the other parcels should hold (as...

Wyoming rules and regs  

Post somewhere public with the actual salary being posted and probably offer more than you think, not having one probably costs more than the extra to...

@mightymoe 👌🏻 spot on! Original CC position for the N1/16 proportion. The distance to the CC from the E1/4 are what the field notes a...

@holy-cow I think they are just stating the CC stone is 8’ north of the correction line between the SC’s i agree with mightymoes method. If the ...

From my experience, if you can find a good dealer that sells used equipment, you get better service through them than new equipment through “authorize...

Did you get this resolved? There is an app or something you have to install/run… I had the same problem but got it resolved, just can’t remember right...

If you turn on the nodes of the dxf, you could perform a single point calibration to the node, to at least shift the dxf to that point, if you don’t h...

I use the “panorama” option very regularly on my Trimble equipment. It takes rolled photos at whatever resolution and overlap you need/want. You co...

As in with a lot of surveying questions… it depends. If anything is to be certified, it needs a full boundary survey, taking into consideration if the...

@wendell this is great info to have. Thank you! We’re meeting with our website guy tomorrow, I’ll get these read thoroughly and discuss with him som...