Notifications
Clear all

THINK - checking CAD linework

29 Posts
13 Users
0 Reactions
1 Views
(@john-putnam)
Posts: 2150
Customer
 

None at my house, we drink straight out of the barrel.

 
Posted : 14/07/2020 5:55 am
(@james-fleming)
Posts: 5687
Registered
 

Your drawing cuts off the source of the wine, so how do I compute the hydraulically head??ÿ I'm also gong to need the roughness coefficient of the piping.?ÿ ?ÿ

 
Posted : 14/07/2020 6:29 am
(@holy-cow)
Posts: 25292
 

@flga

This thread had only been up for six minutes when I gave my first reply.  I didn't wish to spoil the fun for the many who would follow.  It is clearly only glass number three that will ever receive liquid.  Saw right off that one and four were blocked.  Took a bit to see the blockage of number two.  Tried to come up with some excuse that number three would not fill using the assumption the true answer was supposed to be none of them.  Gave up and went with three.  Just kept my yapper shut for a change.

 
Posted : 14/07/2020 6:31 am
(@holy-cow)
Posts: 25292
 

@flga

Look again at a middle of the night answer.  I didn't tell.

 
Posted : 14/07/2020 6:37 am
(@holy-cow)
Posts: 25292
 

@james-fleming

If this had been a question put to engineers then the hydraulics of the arrangement would have been pertinent.?ÿ Only a couple of states expect a surveyor to have any grasp of such things and no states expect such education for draftsmen/draftswomen/draftspeople/drafters/whatever floats your boat.

We are guessing at the liquid and its characteristics.?ÿ It is possible that flow would not occur based on those characteristics.

 
Posted : 14/07/2020 6:43 am
(@norman-oklahoma)
Posts: 7610
Registered
 

@holy-cow

Ah. I see it now. I fell in the trap of finding one error and thinking I was done.?ÿ

 
Posted : 14/07/2020 6:52 am
(@dougie)
Posts: 7889
Registered
 

@norman-oklahoma

I had a guy who would not end his line work, when he jumped to the other side of the sidewalk. Made it look like the sidewalk ended there, and it didn't.

That's what I thought was going on here; being in the cad-mapping category and all...

 
Posted : 14/07/2020 7:00 am
(@dougie)
Posts: 7889
Registered
 

?ÿ

Is why I didn't offer an answer...

 
Posted : 14/07/2020 7:03 am
(@flga-2-2-2-2-2-2-2-2)
Posts: 7403
Registered
Topic starter
 

@holy-cow

That was kind of you, thanks. I should have known. Ummm...FYI I, of course, leaped to a conclusion which was wrong. ???? 

 
Posted : 14/07/2020 7:37 am
(@flga-2-2-2-2-2-2-2-2)
Posts: 7403
Registered
Topic starter
 

@dougie

Thank you, or whoever you are today, for the eleventh time!!! ???? 

 
Posted : 14/07/2020 7:41 am
(@va-ls-2867)
Posts: 513
Registered
 

None would work, if I poured liquid over my screen to see which one filled, my cpu would be fried.?ÿ In the virtual world, 3 is the correct open spout.

 
Posted : 14/07/2020 7:55 am
(@mathteacher)
Posts: 2081
Registered
 

@jph

Indeed they are! 

 
Posted : 14/07/2020 8:13 am
not-my-real-name
(@not-my-real-name)
Posts: 1060
Customer
 

@flga Then my qualified analysis and expert CAD checking abilities was number three, the only one that will fill.

 
Posted : 14/07/2020 9:50 am
(@flga-2-2-2-2-2-2-2-2)
Posts: 7403
Registered
Topic starter
 

After re-reading Not My Real Name actually was first to answer or was it HC or JPH aw hell I don't care it was fun just the same. ???? 

 
Posted : 14/07/2020 2:23 pm
Page 2 / 2