I was able to reproduce the problem, so try this. Leave your SNAPBASE at 0,0. Then in the hatch dialog lower left, use (o) Specified Origin, and ch...
Use mtext exclusively along with it's background mask and the drawing background color. Don't use a width value unless you need to (for long paragrap...
Sometimes when you attempt to hatch an area (especially in large coordinate drawings), the hatching can appear scrambled. The hatch pattern does not h...
It's called Object Cycling and in WellKnownCAD it's one of these. OLD METHOD: Hold down the Ctrl key while picking. NEW METHOD: Hold down Shift+Spac...
Nate The Surveyor, post: 328286, member: 291 wrote: ANOTHER good reason to be able to do this, is you could then copy all the points, and their corres...
I got a Surface Pro when they came out, around $1600 with MS-Office. It's well over two years old now and has about 4 hours actual use. Having used ...
While I'm no expert, I believe (at least in relative) those are also scaled by the drawing scale. In the Settings tab, right click the drawing name a...
If you want, email a drawing of the 3dFaces to dotson [at] dotsoft [dot] com and I'll reply with the 3dArea. Might be able to read the .TIN file, not...
Look for Slope Report on the Surface menu? It may not be included in your package.
What hardware resources do these people have with them at any given time anyway, for example laptop, tablet, iphone etc. A low cost bluetooth recreat...
Command: AecExportToAutoCAD2000Dxf
So install it on that machine you used to use that's still too good to discard. Doesn't everybody have at least one of those?
Download the free Autodesk TrueView and convert yourself whenever you need without waiting for others to do it for you.
If you are running an AutoCAD engine (including the OEM) it can be found in the OPTIONS dialog, Selection Tab, left side. Or you can use the PICKSTYL...
I believe Carlson creates separate entities bound in a group. If your groups are off it would exhibit this behavior. On some versions Ctrl+Shift+A i...
If you have a recent version of AutoCAD you can go straight from 3dFaces to 3dSolids.Commands: ConvToSurface, Union, Extrude, 3dOrbit just for starter...