Please keep us posted as you get a resolution. I'm interested in how this turns out.

Before you consider hiring another surveyor, give this one a chance to explain, and correct his drawing if needed.Some things to consider are:The pers...

I believe FEMA says that non-engineered vents that have the ability to be opened/closed must be permanently disabled in the open position. There is a...

Me too, I saw once where a platted sub front lot corner was 0.07' from a PC of a curve in the R/W, and Florida law requires you to find/set both...

"The LOMR is generally accompanied by an annotated copy of the affected portions of the FIRM, FBFM, or FIS report."That sounds exactly like what I saw...

I've seen a similar situation, and it was resolved with a LOMA. Although, it looked like a very complicated LOMA. They basically remapped the area a...

Frequency-hopping spread spectrum (FHSS) is a method of transmitting radio signals by rapidly switching a carrier among many frequency channels, using...

The spec sheet for both the Focus 30 and Ranger 3 (with radio) call the internal radio "2.4 Ghz, frequency hopping, spread spectrum". That means it i...

Are you sure it's a bluetooth problem? I don't have a Focus 30, but I think it uses a 2.4 ghz radio modem rather than bluetooth for robotic communica...

Post Link?Yeah, probably should have included a link. This is where I found it.

I'm pretty sure that you could get a FIRMETTE for free, but they charged to download the entire map and FIS.

Thanks,I thought Wifi was supposed to be universal ... Unfortunately, it's not my Iphone, so I don't want to mess with it too much. I really just wan...

I couldn't agree more with those saying that the respective boards should be informed. Both the surveyor and realtor sound like they need to be relie...

Thanks,Good advice here. My wife has an I-phone on T-mobile with a hotspot that I can barrow and try it out, that could at least eliminate my phone/a...

I was going to mention that, too. The newer version of survey pro will now cycle back to point #1 on stakeout if you hit "next point" after the last ...

I used to do the same thing with a topcon hiper base. I made a collar that fit around the "neck" and made it very difficult to remove. Then I had a ...