Ron Lang, post: 438500, member: 6445 wrote: You and me both brother, sometimes I feel like I'm in the matrix!!Please review title block on PDF

when i survey all i see is triangles laying on the ground ...... thousands of themtriangles on a busy toe going to more shots than required on a not s...

Fill it with aluminum solder, grind and restamp or reset cap (a lot of work)just don't start a fire.Practice on a scrap piece of aluminum first see ho...

Yes i suspect the problem is the management of the drawingsAutodesk says put as little info in each drawingsso i would contol it as followsLot Boundar...

This is caused by some junk image viewer so unistall all programs except the ones you use.I sent my Cad station to a supposedly good computer store to...

In order to control survey cad in LARGER projects that have Multi users following that are working on top ofbase survey drawingSuggest the followingM...

JKinAK, post: 436553, member: 7219 wrote: Dynamic is better for some things and worse for others.After all the checks are complete and you are satisfi...

The Cad manager has issue why should he support Carlson (i think its a basic cad program) and C3D is a monster ( i suspect CAD manager is having probl...

Hi LeeWell i hope this goes your wayBut on some sites it seems that they purposely change engineers every year so or so to blurrythe paper trail. I ho...

Hi LeeI know on this mine site that may they have lots of OLD Pre GPS control i assume !well reinforce IT and upgrade, and clean it............. its n...

Nice LiFePo Is the way to GoBig power + Safe + Lite + Last battery you will Need what more can be saidI run them in all my gps, Moto bikes and quadsNo...

spledeus, post: 434801, member: 3579 wrote: That's a little extreme.We sent in at dawn to layout a mcmansion. We were wrapping up when the form crew ...

There not synchronized until post processNot like RTK GPS which "IPG" = instant position gratification.

Yes i have gone RTK GPS LAZY wide open terrainOn a 10 acre topo for a rail yard expansionLooked at itAll Robot requireddense Trees and Blackberries + ...

Hi LeeCanadamost everything here is UTM 6 degree zones NAD 8399.9 % of the time we localize of of UTM GPS brass cap monuments that are all over the pl...

LeeThe radios i use are UHF broadcasting message RTCM V3.0 just have to set the right frequency on GPS doser as wellto match Leica Base. just have to ...

Here is the Agilent multi meter set to average current with theGS 14 working as a base at 1 wattSoTheMathIs6.0 Ah /0.3 Ah = 20 h and the units work ou...

Hi Here is a photo of a satel 3Asd 1 watt UHF operating as a repeaterThe satel in the GS14 is the same as Satel 3asd but a much More compact version f...