I think the size of the project and accuracy requirements could dictate what you are doing as well on a few acre site I think a simple conversion coul...

We have sokkia's which are basically the same gun we have gotten up to 1800' of range out of the RC-PR 4 and 5.

Level up the gun really well run the tilt offset routine, then re level run the collmination routine, then run the image sensor reticle offset routine...

Do you mean 2-3 mm per km. we have a sokkia digital level that has a wave function after using that our closures tightened considerably. With loops un...

Try atlas electronics they do screens and locators and I think keypads I know screens used to be like 400 so I would think keypads would be cheaper

Is it survey pro 5.5.2 or newer early versions eg. 5.0 and 5.1 had issues with large files either way I would reload survey pro in the newest version

For once a year a standard 18 volt cordless drill will work buy the roatry/high speed concrete bit 1/32 or 1/16 smaller than the pk it won't be fast b...

I think the problem you will run into is that the flx uses features and not descriptions so when you export an ascii you have no description. The only...

We used atlas when we had nomads and they always did a nice job.

In 5.5 you can isolate the vertical and horizontal in the resection ie. Shoot cp100 then 101 then benchmark 100 then you would unclick the yes on the ...

It seems like flordia has a free cors network. Running annetwork rover would eliminate the need to localize as long as you are working in the same sys...

We're not in flordia but I cannot see being competitive in highway layout using a level to grade every stake. Robotics are the only way to be fast and...

What receivers do you have i'll check my survey pro 5.5.2 to see if supported Spectra support is not the easiest to get ahold of.

Have you tried factory resetting the Hipers and Hard resetting the DC I remember we had a similar problem with our Hiper 2's. are you hitting finish s...

Not to question anyone's methodology but what would the issue with doing this optically with sufficiently long sightlines say 2-4 x height. Again not ...

If you can get some good long sight lines at about 90 degrees and maybe 1000-2000 feet away assuming you can set up on top of the formwork and run a 3...

I am trying to get my head around the spatial orientation but couldn't you shoot a bunch of reflector less points on each wall and run small interval ...

I got it figures out I emailed the .survey file to myself and something must have gotten corrupted I used dropbox and it worked fine thanks for taking...