@jon-payne

@andrewm That SX10 will work. On this project, the other surveyors starting traversing with an S5, which constantly lead to differences. Once they br...

@andrewm NSPS procedure for determining spatail data accuracy requires the equipment used to test the dataset be 3 times more accurate than the final...

@zammo I found the routine to stake 2d line with a surface. In Magnet go to Stake >Linework?ÿ Press the M logo in top left. Go to Setup >Refe...

@bstrand To use the FC5000 and FC6000 in rain, you need the special stylus that connects to the power port, and set to rain mode. This works in a dow...

Sounds like you are using L1 GPS, since you don't mention OPUS? What GPS recievers are you using? What procedures to get coordinates, static, rtk, rtn...

Lots of questions. Why do you want ground? How did you localize? Did you get any static data? Why are you not using grid? What are they comparing...

It is deceptive to the general public. Whom will see only one thing, a line in proximity to the boundary and therefore use it as such.

Yes, absolutely notify them. Also find out who placed the property line on the drawing and notify the board. Likely this was done by the Engineer. A p...

@zammo You are suggesting a routine exclusive to Pocket3D software where you can stake a 2D line and reference the elevation from a design surface. U...

@zammo?ÿ "can't use a TIN model for vertical reference" You can import a surface model (XML, TN3, TTM) into Magnet for vertical reference. TIN format...

Crossing my fingers ?????ÿ

I've been using a refurbished GT-1001 w/ RC-5 for the past few months with zero problems. The only complaint I would have is with the battery. If you ...

85% is the 3d printers cost, not much profit. If you have access to a 3d printer contact me for the obj file.

@cf-67 Thete is No layout on?ÿ ground, system. ALL stationing and inverse are on grid when in SPC. Basically when in SPC every thing is on grid. It ...

@cf-67 When working on grid with a tape or edm the distances must adjusted. The EDM distance is ground distance.?ÿ Magnet always stores the raw groun...

@mathteacher I use Topcon Magnet Field / Magnet Office to navigate in SPC using GNSS and EDM all projects. As noted the software will calculate the C...

@lurker I was taught to Never scale coordinates. CSF is only applied to distances. Odd that a DOT would not understand this. The CSF changes at every...