You can get the Roads module for ACCESS and you wouldn't need SCS900.

I quoted you straight from the TDS Ranger service manual. Regardless,if you do not currently have Wi-Fi, your option is a CF wi-fi card or an SD Eye-f...

The TDS Ranger 500X came with wi-fi standard. The wi-fi chip is on the main PCB that is common to the ranger 500x and TSC2. The Spectra 500X had wi-fi...

Best tool for calibrating a rod, by far, is the ChrisNik True Plumb. I have 2 of them in my shop. One for prism poles and fixed height GPS tripods and...

Trimble Yuma has been out for a couple years now.

Try doing a screen alignment and hold your stylus on the cross hair until it moves to the next position. If you are still having problems after that i...

Main problem with those units is a lack of service parts. TSCe is completely dead, you can't even get the blue caps anymore unless you find some deale...

You can also run a SIM card in the TSC3, that is how we set up our VRS rental units. Although if you have a laptop or smartphone in the field with you...

Check to see if the Power Save Mode has been set to on, I remember a problem with a unit cycling when power save mode was turned on. I am pretty sure ...

What's the difference from putting the prism on a laser plummet tribrach on top of a tripod?

The older radios with the BNC antenna connector needs the transmit and receive voltages checked and/or adjusted about once a year. It is part of a ful...

I am pretty sure you are going to need a serial adapter to get it working. Trimble recommends the Edgeport brand of USB to serial adapters. I use a JD...

That is the right trimble part number, I have about 10 in stock. There is only one BNC antenna for the Geodimeter/ATS/5600 available anymore. There us...

Had 20 on our NetR5 yesterday and 19 on a new R8-3 today.

Hello, first post here. I found this site through twitter and I have enjoyed the forum questions and answers. I have worked on Trimble equipment for a...