There is probably a way with Grid File Utilities but if you have access to Carlson Civil, the route I would suggest would be to: Use Grid File Utili...
It could be a myriad of things ranging from an orphaned custom object (such as those left by Autodesk Civil3D), to a non-typical block insertion to pe...
Trying to follow what I think was the chain of events... Posted by: NeilRickWe located with state plane using a wifi connection and mifi set up in our...
See if this thread helps.?ÿ
Dave Karoly?ÿhas it correct. Refer to the "Two Mathematical Models, 2D/1D and 3D" discussion in the SurvNET Introduction for additional information.
Carlson Technical Support is free ("4ever is a mighty long time"). Copying the?ÿintact SUP & USER folders as previously cited would generally work...
On a fresh boot of the computer you might try a right+click on the icon installed with the product and choose the Run As --> Administrator option. ...
Can you describe which CAD engine and version you're using to power the Carlson product? To my knowledge, the Carlson application does not make any di...
I don't believe this will work (especially in SurvCE). Importing the *.raw and saving as a *.rw5 and then doing a bit-wise comparison would be the app...
If you'd care to send me your source raw file that came from SurveyPro (lnelsonATcarlsonswDOTcom), I'll take a look. If you could also include somethi...
The types of raw files that SurvCE/SurvPC can process at the current time are *.RW5, *.TLV and/or *.PRJ file types (explore the File tab -- Raw Data -...
My suggestion would be to exit from all software applications (e.g. Carlson SurvPC, etc) and make sure the BlueTooth stack is enabled at the Windows l...
The short answer is "Yes" per work that Carlson has been sponsoring for the past several years through the Open Design Alliance. This on-going work ha...
The current (2019) link to the Export DWG File with Esri MSC?ÿcommand is provided per request.
Presuming you have entities (e.g. points, surfaces, profiles, etc) that you wish to have remain in the DWT file for one purpose or another, the routin...
Based on what you've posted: P=40025 Y=97988.013 X=2016618.196 Z=1331.307 D=mon N=undisturbed N=2-Jan N=found N=iron rod In the title of your thread, ...
With many points and many alignments, my suggestion would be to run the?ÿCALCOFF routine to calculate and report the offsets of all points with respec...
You might try the RESETUI (Reset User Interface) command key-in. I don't recall if the command was available in that version of Carlson but it might d...
