Last seen: March 10, 2026 1:01 pm
contours and breaklines >Laddlnelson @ carlsonsw.com--Ladd Nelson
It's usually something simple... perhaps a 2D polyline was used rather than a 3D polyline. Another possibility is the infrequently visited Selection o...
"Buyer beware" as they should first determine if the cited software licenses can (or will be allowed to) be re-assigned to the new owner(s):> 46. P...
The primary reason for the short-cut menu is that is the default settings as offered by AutoCAD.To set the Right+Click menu functionality, try either ...
If you are using the 2010 version of Carlson Survey, the CG-Survey -- Management -- Transformations -- Copy Coordinates command should fill this funct...
Within the Carlson 2010 Documentation (95MB download) are the following tutorial lessons which might provide some valuable step-by-step assistance: L...
Hi Carl,I checked with the SurvCE programming and technical support staff and they indicated Carlson "has done some work on the Topcon's recently" (wi...
I don't have the 2008 OEM installed to my computer but you can switch to a Layout (Paperspace) and run the View -- Viewports collection of commands. H...
It could potentially cause a conflict (this is one of the reasons Carlson adopted the approach cited in the 2010 version).If User "A" is opening and u...
As a CRD association is made to a drawing, the information would be written to a *.INI file and would contain a line that resembles the following:Carl...
Probably the quickest method would be to explode (Edit -- Explode -- Standard Explode) the hatch entity and then issue the Draw -- Shrink-wrap Entitie...
Hi Peter,I would suggest downloading the latest edition of SurvCE by visiting and install the appropriate build over your earlier version of the soft...