What are the topic calls leading up to and away from the corner you seek. Those calls are equally as important.?ÿ

Richard?ÿ Ahhh Yes?ÿ I need to use the wrench key to reset the "mount point"?ÿ ?ÿ ?ÿThe Trimble software grabs the nearest automatically, so I am a li...

Mark,?ÿ Yesterday I tried this procedure to no avail. There was no drop down?ÿ I ended up using the original Base and averaged shots to get a good app...

Hey .thanks .mine was doing the same. So I'd shoot manually and check xyz.?ÿ This will be great

I have come upon a similar situation.?ÿ The previous surveyor used "Leica Network" as hi base for elevations.?ÿ I ran a FEMA reference mark 88 datum f...

Dear Just,?ÿ DONT USE OFFSETS IN THIS CASE?ÿ What I have done in these cases, is set a projection point out front. (maybe even two of them)?ÿ perhaps ...

Hey?ÿ?ÿ Yes, I have three of the 4000ssi units .only one works,?ÿ two 4000se units that work.?ÿ ?ÿ, a 4700 that refuses to start up occasionally and a...

Thank you Jim,?ÿ I think that since I've been running in the stone age for so long, anything will be better and faster.?ÿ Since I always take long sho...

I'd be inclined to refer to a preferred location as the ne corner of a lot etc?ÿ ?ÿjust my prima facy glance

I'd be inclined to refer to a preferred location as the ne corner of a lot etc?ÿ ?ÿjust my prima facy glance

Prorate to the center of the alley.?ÿ Then back off 8 feet each side, then prorate the lots.?ÿ The alley is street. It maintains its width forever. Ju...

I've done it both ways.?ÿ Rim down or extension rod?ÿ ?ÿ ?ÿ The extension rod works best in those sludgy manholes.?ÿ ?ÿGood job my man?ÿ

Hi Jordan.?ÿ ?ÿ Saw one of your maps this week.?ÿ?ÿ I worked in your city for many years. Worked with the old guys.?ÿ Big company. Gotta secret stuff ...

Not sure I am following the thread here as it relates to ALTA surveys ??ÿ ?ÿBUT,?ÿ Here is my answer to the topic question.?ÿ I add a line item called...

Congratulations !!!!!

Thank you Shelby That's the guy I'll call.?ÿ ?ÿFor some reason, the price for intuicom that supposedly will work with my 4700, keeps growing.?ÿ ?ÿ?ÿ I...