Try hanging up and redialing after connecting. ?ÿI use an?ÿR8 with a TSC3. It used to go to 'fixed' after logging in and selecting the mount point unt...

Read this

We have the survey pro level module (TSC3) and use it once every few months (or so) to monitor some settlement over an old landfill. We export a Level...

Jim in AZ, post: 403976, member: 249 wrote: It's amazing to me that we can measure so accurately now that changes in the earth's rotational speed due ...

What NAD83 adjustment and what Geoid model are you using?Geoid12A should be used with NAD83(2011) and Geoid09 should be used with NAD83(2007). In my a...

The RI in RINEX means Receiver Independent. I've never observed an issue with mixing RXs as long as the correct antenna model is used and assuming the...

One man's noise is another man's data. Multipath measures Snow Depth

If you are in the program and like it, then get the ABET degree. It might not mean much to you now but it could make a difference in the future. It di...

I was looking at the raw data, --BP,PNBP001,LA42.092425084133,LN-73.260161693810,EL196.5442, AG2.0000,PA0.1060,ATAPC,SRBASE,BP,PN_0000,LA42.0924250842...

we use a trimble DiNi07. Our other gear is S6, R8, and TSC2 with Survey pro. You have to buy the leveling module for Survey Pro. The software works we...

thank you!

If you use the db9 or serial connection at the R8 then you have to provide power to the R8. ie. no power trough the serial connection. If you use the ...

you need to read up on M2M (machine to machine).

48, WASP, BSc - Geodesy and Geomatics Engineering (UNB), MS - Earth Sciences (SIO @ UCSD), CA LS for 8yrs

I've used OddCables.coma few times and would recommend them.

Airborne HydrographyFugro Pelagos in San Diego does bathymetric lidar.

We have the S6 (w/ tracking prism)and R8 controlled by TSC2 running Survey Pro 5.3. We use a Verizon MiFi Hotspot to connect to the GNSS RTN (CRTN) vi...

Thanks, So the shift is from the geocentric ITRF08 to the non-geocentric NAD83 ? I've seen the shift value stated as around 2 meters so that fits with...

Awesome - Thanks for sharing.Whats with the transformer? Did that thing really come down right next to you?