My two cents on transitioning from SurveyPro to SurvCE: 1. The connection between my instrument (a Sokkia SRX3 robot) and the data collector is not a...
rfc, post: 373600, member: 8882 wrote: John didn't answer YOUR question, so I'll try. I don't think you can just subtract the factors ("39 ppm LARGER ...
I run a Sokkia SRX3 with RC-PR3. I would be interested in comparing notes. Before getting the SRX, I ran a Topcon GTS-225 for several years, and ran ...
I discovered this issue in the field on my own, unfortunately, like Jim, after having performed 2 jobs in the field with failed offset measurements. T...
I recently had the touchscreen replaced on my data collector. In the process, the manufacturer also loaded the latest version of SurvCE, and shipped ...
Kent, One suggestion I would offer about your abstract form is that you might change the width of the "remarks" column to be wider and figure out how ...
W.W.S., post: 371740, member: 11419 wrote: You should check out the Survey page of the MassDOT website. There are "interactive" maps for town corners,...
Scott Zelenak, post: 364457, member: 327 wrote: Unfortunately no conversion tool.find some NGS stations close by that have USSD and NAD27 positions an...
Loyal, post: 364455, member: 228 wrote: A spheroid (ellipsoid) is just a shape, NOT a datum. Any given datum uses a specific spheroid (ellipsoid), but...
Scott Zelenak, post: 364451, member: 327 wrote: You're in the same boat I'm in.Those are most likely United States Standard Datum not NAD27.It's more ...
Thanks, Teach! The tool I had used and provided a link to is described as follows: [INDENT=1]This utility uses NGS program SPCS83 or program GPPCGP t...
NGS has a tool at which allows for conversion between NAD83 or NAD27 Geodetic Positions to State Plan Coordinates. The work published in the Atlas p...
Well, I've still got it, and I'm open to reasonable offers. I think I'd rather not hold on to it, but settle it now and move on. As for what it is ...
pmoran, post: 360587, member: 8922 wrote: It will work just like the advertised PS in the Hayes add- you will need to use Magnet Software but a SRX an...
I saw an ad today at Hayes Instrument for the Topcon PS. It showed a prism pole, and on top of the pole was a 360 degree prism and on top of that a H...
Thanks for the post, Jerry. To my knowledge Ashtech Solutions (2.7) and GNSS Solutions (3.8) are two different software programs. Actually, I don't ...
I had trouble finding the latest version of GNSS Solutions, but found it on Ashtech's FTP site: ftp://ftp.ashtech.com/Spectra-precision/Legacy/Land%20...
