JimIt does and it doesn't! If you mounted the plate on a perfectly level surface with the 120 degree radials scribed on it from a centre point then le...
Ebay is probably going to be your best chance. I've got one and it came off Ebay. I'd guess there are a lot of them lying around unused in the UK as w...
Just a guess again Don, but have you checked in SurvCE the settings under the comms and RTK tabs for the GPS rover? Something like an item that confli...
DonWhich SurvCE version are you running? You could try soft reset/hard reset/SurvCE reinstall in turn. Or, a reinstall of the receiver firmware? You c...
DonI had something similar a few months back and the solution was to make sure for all configurations that the base was sending RTK corrections in RTC...
DerekNot a permanent solution but something that might keep you working,Instead of using the A button you can go to the 'Equip' tab and the 'Configure...
There's a lengthy article hidden away somewhere on the fig website. A Google search takes you directly to the downloadable pdf.Copy and paste this int...
It's not only scanners, I've had problems with topo plans where if they've been sent to the client as a pdf or dwg and their printer doesn't print man...
Joseph Conrad was such an optimist!“Facing it, always facing it, that’s the way to get through. Face it.” “Droll thing life is -- that mysterious arra...
This might explain slightly better than my rough description!Reflectorless measurement would be another option, which would pick up any torsion or twi...
Hi RoveryanIs this a 'lattice tower', square in plan with four legs tapering up to a 'shoulder'?Usually above the shoulder there's a bolted on pyramid...
Hi KevinYou could get in touch with the Ordnance Survey of Ireland, they might have some ideas and point you in the direction of doing something that ...
A very informative response here, from JerryS, second post in this thread:Referring to the Topcon IS-3 but probably relevant to all brands of imaging ...
Continents apart of course, so not comparing like for like, but something similar in Scotland would set you back $1,000,000!
Great! Never heard that before.I've listened to this drafting into the night to beat a deadline and been moved to tears - one of Scotland's best, Jack...
SDAre you trying to survey the entrance to the tunnel or the bore of the tunnel?GPS/multibeam would be best to locate the entrance if there aren't obs...
JudHere in the UK we 'went metric' - but we didn't, not in a total way. I'd say most people over 50 or so still visualise in feet and inches. Road dis...
