The plot settings from Model space can be different than Paper space unless you preset your settings.. Inserting another drawing into your active dra...

Sounds like you don't have your cbt as the default option. If you weren't using the normal template set up when starting a drawing, it might be defau...

It looks like the block it is trying to use for the points (SRVPNO1_anno) does not have the attributes defined to populate the data fields. If you sw...

I am left handed but have adapted to the right handed man's world.

@i-ben-havin yes, there is a delay in receiving the internet stream.

We have a similar site condition witha current project, we split the filght into two parts, one to cover the top half od the slope and one to cover th...

PDMode needs to be set to 0 or I use SPT0 for the carlson point and pdmode 3 for "x"

@chris-bouffard You would see greater variances if using VRS corrections over internet. On site base over radio will give tighter results due to the ...

Carlson has just announced a US made drone CAP50

I have not run into this in 2023 running on top of Intellicad 10.1 or Civil3d 2023. I assume you hae sent them your dwg file with crd and settings ...

Are you flying RTK or standard photo? If standard photo, a few more GCPs would help. Is this all one flight or multiple? There is a big gap through...

Are you flying RTK or standard photo? If standard photo, a few more GCPs would help. Is this all one flight or multiple? There is a big gap through...

@norman-oklahoma Beg to differ, that was a copy and paste straight from my Civi3d 2023 command line. Try -dwgunits

@norman-oklahoma Beg to differ, that was a copy and paste straight from my Civi3d 2023 command line. Try -dwgunits

For the issue of the inserted linework, check the DWGUNITS. Here is mine. -DWGUNITSDrawing units:1. Inches2. Feet3. Millimeters4. Centimeters5. D...