@norman-oklahoma Beg to differ, that was a copy and paste straight from my Civi3d 2023 command line. Try -dwgunits

For the issue of the inserted linework, check the DWGUNITS. Here is mine. -DWGUNITSDrawing units:1. Inches2. Feet3. Millimeters4. Centimeters5. D...

@jflamm you can download Business center and import the terramodel file and export without any modules. There is limited commands availabe without bu...

Easy to see with a picture 110.31-107.67 = 2.64 2.64/0.25 = 10.56' from road to ground @ 4:1 12.0+10.56 = 22.56 o/s for toe of slope 28.5 (rod o/...

@fairbanksls Same here.?ÿ Solo practicianer with 3 employees. Me, myself and I.

@remi I detest using Civil3d, I use Carlson running over Civil3d.

I assume you are setting points using the offpts command. Easy answer is no, the descriptions do not update with a change in centerline definition.?ÿ ...

@james-r-(jr)-smith I use the other type in the Annotate->Line Types->Polyline to Special Line ?ÿ The Spacing is printed inch spacing.?ÿ I wo...

@350rocketmike The yellow arrors sides are to be used to maintain good elevation, the ofther 3 faces would generate an elevation difference of close t...

It is affected by your lintype scale.?ÿ 50 is a huge gap in spacing.?ÿ I usually have a spacing of around 1 for a text size of .1

@jim-oneil That works to convert C3D contours to polylines, but using the c3d_tin by itself will convert C3D surfaces to Carlson tin files (full top s...

@johnhls I've run into that a few times.?ÿ I use the draw boundary line command in the draw pull down menu to enclose the hatch area and then hatch as...

@gmpls Use the c3d_all command in Carlson, it will convert points, profiles, surfaces, alignments etc to carlson format for you without having to go i...

@ladd-nelson Thoughts on above?

@jph Dude, I learned something new.?ÿ Appreciate it.?ÿ But you can still have the osnaps on at the same time.

@jph I have Node or insertion as snaps in Civil3D, not "point"

The biggest thing I remember from early days, for point symbols, I only use spt0 point block and use the pdmode of 3.?ÿ If you use a different spt blo...

Maybe instead of double clicking the point, maybe Carlson can add that tag info to the Drawing Inspector point data. Ladd???