Typical setup: # Set receiver as base $PASHS,CPD,MOD,BAS,0 # Configure GSM/GPRS $PASHS,MDM,PAR,PWR,AUT,BND,1,PTC,...

yes. The ProMark 500 can use its internal GSM modem for NTRIP.It can be configured as a base or rover, depending on the setup.For a base, the receiver...

Up until now, everyone who installed P006 has managed to get their GPS working again. Maybe you need to downgrade from OS F/W 2.16 to OS F/W 2.12. You...

Preparation of the SDCard:1. Insert the SDCard in the card reader on your desktop. Format it in FAT32 2. Copy in the root directory of your SDCard the...

@alan-cook Preparation of the SDCard:1. Insert the SDCard in the card reader on your desktop. Format it in FAT32 2. Copy in the root directory of you...

@markleedsuk hello Mark ,it's not necessary to convert to rinex if you use BASE and ROVER the résults in post process is correct , there is a video ...

@alan-cook Hello Cook, if you are working in static mode, it would be better to convert your files to RINEX. And since the date is shifted by 1024 w...

hello ; Key Point: “Wrong” Date Display Doesn’t Affect Accuracy Even though after a GPS Week Rollover the module’s displayed dat...

FIXED

Subject: ProMark3 Revived – Thanks to Ahmed.vilic and Important Firmware Advice Dear colleagues, Thanks to the kind and generous help of our dear ...

@aelefth Subject: Request to Receive Firmware Files for ProMark3 Hello, Thank you for your message and for checking the P008 firmware. If possi...

@asterya Dear Yannis, Please accept my apologies for not replying sooner. Thank you for your message. Unfortunately, I still haven’t found a solu...

"Today, I downgraded the firmware from P011 to P010, but the problem remains the same. The automatically displayed date is July 10, 2005, while today ...

"Advice to all Magellan ProMark 3 GPS owners: Do not update your devices to P010 or P011, otherwise, they will be good for the trash."

@alan-cook I think it will be the same for me, but I will keep it as a souvenir anyway. thanks 😋 😋

@alan-cook

I am reaching out because my ProMark 3 receiver has developed a bug in position calculation, despite receiving a PDOP of 1.5 and a sufficient number o...

@alan-cook This confirms that other ProMark 3 users are experiencing the exact same issue. The fact that multiple units failed simultaneously strongl...