OZEE, post: 323873, member: 8262 wrote: If you run 2014.20 or higher you no longer need the construction instruments code Really? I have just wasted ...
Interested in your android ntrip client John. What is the name and where can I get it?
Construction instruments unlock code will be required on a "survey" TSC3. Cost was £200 for me. If you have bought Access for a yellow "construction"...
Now have this fully operational as GNSS base station broadcasting on the internet.Needed a fixed IP SIM card on the attached 3G modem. Even with DynDN...
I have had this before. The "units" settings in job properties seem to to determine the order of CSV co-ordinate import.The settings on "export fixed ...
Thanks for the info. I'm interested in the stakeout and roads routines. Have they come from smartworx or written from new?
Was using this as a mini-prism today and realised there is no bubble on the top. (unlike MT1000 and the older trimble active target.)I used a short po...
I have finally downloaded the test measurements.I set up 2 targets, 1 at head height and 1 at about 1.0m height.I setup the instrument approx 23m away...
I can confirm that it measures in prism mode, not DR.Integrated surveying is possible (otherwise the thread would not be on the top) but I think a mod...
> My current thoughts, given that I did not notice any disernable difference in Active and Active plus measurement times in SCS900 is that there ma...
Access user here - I believe that active+ (called semi-active in access) doesn't work in tracking mode, you will just get an active measurement. I hav...
The S6 doesn't need to be moved through the circle because it has an absolute encoder. The compensatir calibration does require rotation horizontally ...
Ah sorry, I did some tests on the vertical angle but I never downloaded the results for analysis.I have on one trial again now.There is an ebubble ava...
The Trimble forms lines using string numbers usually. You are also free to build codes eg ,n for new string. It works very well for what I need. I can...
Reflectorless total station underneath?
select "all files" from the file types drop down, the required BOS files are in the Mapping/UK folder
The *.bos file is what you want for Starnet v8,Unless you have an older version?I don;t know if Starnet supported OS grid in previous versions.
Are there any other differences to the old instruments apart from the tracker chip?Bear in mind that the "scanning" is simply a software update to Tri...
> We have the field crew download the data everyday when they get in. On the data collectors we have you can use a cable; or flash drive, or Blueto...