Ok, I have discovered that the network router is not forwarding the inbound connections - or to be exact it is doing so sometimes, but inconsistently....
Thanks Lee, I can download the rapid and precise orbits using the "internet download" feature - very handy.Unfortunately it's not set up for reference...
OPUS RequiredThanks I can download reference station data from our national provider - Ordnance Survey.I have done this before and it worked ok. I was...
Switch it off and on again? (hold power key in for 3 secs)
My TSC2 batteries are dead so can;t check. On the TSC3 there is a desktop with icons for all the different programs (file explorer, settings, etc;). I...
can you start survey controller from the desktop icon (or start menu)?
finelock is a trimble feature that enables shots on prisms closer to other prisms. gives it tunnel vision.it's available on the S8 but not on the S6. ...
> You cannot trust two point resections in access if you are much closer to one of the points than the other. This is also detailed in the resecti...
no instruction manual came with it
First impressions -1) The battery is under a twist off cap. About 1/6 turn to release it. Unfortunately the male 5/8" connector on top is also mounted...
Will be setting up some tribrachs to test next week I think.Will compare to MT1000 (active and passive modes) and also to the trimble traverse prism (...
About £1500 GBP I think. My distributor only has 2, and I don't know if either are for sale yet.The MT1000 sells at £1890.
If your line is deined by points a and b, and you have your surveyed point c. Calc difference in bearing between ab and ac. (angle) Calc length of tri...
brilliant, thanks for the advice
> Of course nearly anything can prove to be a multi-path hazard (though the profile of that skinny little antenna maybe not so much). If it did, it...
Are you using a serial to USB converter?Need to know full details of the hardware setup if any one is to help you.
Ah I see - I don't have the antenna or external power attached.I have had used it without the extension before, I was curious what is "wrong" with not...