Also,If you dont see the mountpoints hit the shortcut icon in the status screen for "Show all mountpoints" If its an older version of magnet like 2.6 ...

The 8200 is looking for the strongest return signal. For the highest accuracy be sure 1 prism is facing the robot before taking a shot. If you have an...

I use FindAControl on my android. Works well

For a cloud based solution take a tour of Magnet.br>The field crews could exchange jobs/job files on the fly while in the field with themselves or wit...

Your dealer can help you optimize tracking. Thats part of their normal delivery and setup (I assume)There should be no comparison of the tracking of ...

I would do what they say then. stay with the Topsurv7

you should be able to upgrade to Topsurv8 at no charge. Good collector if you dont need WiFi capability. If it has robotics or GPS sounds like a fair ...

survCE may require a static IP. Never tried with that program. Easiest way is external radio or a repeater

if they have the internal GSM modem then yes. A TRU report would confirm.

Not all GR3 units had the internal modem. Some had GSM and some had CDMA.Easiest way is to use the Magnet Relay feature. You can use the internal mode...

Static files are stored in the receiver. Your dealer can explain in detail

Your instrument configuration in the data collector should allow you to set the radio channel and also a RC channel. If you have both robots set to di...

With the Topsurv, Magnet or Spectrum Survey field software the picture is linked to the point number. Goto edit points and you can see the pictures as...

How about a Trimble 5700 Base with a 5800 Rover system. Nomad data collector with Survey Pro. Email me for pictures if you are interestedruss455@yaho...

Use PCCDU or Topcon receiver Utilities for a list of activated options and what is available on that receiver. Those same programs would be used to...

Did you try a cable as well as a Bluetooth connection? are the both very slow?