Last seen: November 12, 2024 6:31 am
What is your problem or question? Hard to tell from your screen views. C3D has settings for break lines in the figure prefix database, surface settin...
Difference between s5 and 7 is mainly angle accuracy. I used a s6 with vision for 4 years and very rarely sighted through the optical telescope, using...
OPUS is free, so I wouldn??t complain. You can process your own data, which most times I do. ?ÿBut if you send static files through Trimble??s onlin...
Make sure your office software is updated. If you have receivers that don??t have firmware to account for the leap second, some fixing of the data fi...
On the Point List, highlight what you need then right click and there??s 2 copy options, then paste somewhere and print.
Are you sure a TSC5 can communicate with a Leica instrument even with a cable with correct ends on it?
Glad you have so much work you can turn down potential business because you are unwilling to meet a client??s specifications and requirements. ????
It must be an old receiver if you have a long wait to reinitialize. And just 8 mpg? It must be set running when it doesn??t need to be. You have no c...
Do you mean openroads designer not opensite? I??ve never used inroads, which I head is a discontinued program.
@rover83 agree. Generally the bottom of antenna mount is your height to enter.
@rover83 your experience, which is not done that way where I work. I??m sure there??s a lot of sloppy file and cad technique etiquette out there.
If cad techs are exploding survey figures, they are using a hammer to cut vegetables. Survey base maps should only be referenced in.?ÿ
Rechargeable electric hammer drill with 1/4 and 5/8 inch diameter drill bits so you can set a MAG nail
@olemanriver TBC will handle it all, though one important thing is to not do a point average in TA when anticipating a network adjustment in TBC. This...
If you have TBC, you shouldn??t be using civil 3D to adjust. That??s a big waste of TBC. I use GNSS static, RTK, and total station data in the netwo...
This is about data for NGS use, not for business use
Basically NGS doesn??t deal with data shorter than 4 hours and they like 12 hours for their data. Once time gets to 12 hours, calculations settle dow...
This most likely is a height error either in the field or office software on the GNSS end.
New pipeline? Existing? Only doing waterbody crossings?
Through the Wi-Fi setting on the windows mobile on the 3.
