Last seen: November 12, 2024 6:31 am
People mostly aren??t using laptops off being plugged in, so manufacturers aren??t trying to make them power efficient, but powerful instead. A work...
@rover83 I remember hardly anything new was added to 2017, that was because they were basically working on programming 2018 for 2 years on Windows 10.
@350rocketmike 2021 was the first version for android, so it was to undoubtedly be buggy
@aliquot yes, state surveying boards are too old fashioned, most requiring you to take their state portion of the PS exam, unlike engineering that mos...
Beidou are the best satellites up there. The B3 set broadcast 4 signals and have the least noise in their signals.?ÿ Also you are recording way too m...
The .dwg file format of 2022 C3D is still 2018, but it seems survey database, surfaces usually aren??t backwards compatible to previous C3D versions....
You are seeing real world results. Typically H precision is 1/2 of V precision, I.E. the 33/66 ration you mentioned?ÿ
You are seeing real world results. Typically H precision is 1/2 of V precision, I.E. the 33/66 ration you mentioned?ÿ
I have found each newer version of C3D to be a little but faster than the previous version. No need to stay 2 years in the past.
I??m not sure what your complaint is, but as far as I know, you??ll have to go through a vendor to get a new software warranty for Access. You can?...
No it isn??t. ?ÿYou cannot use a Trimble static file in the field to get the position from. A static logged file need to be post processed by some me...
Fast Staic is for logging static data with settings as in its Survey Style. If you want to log data and use that receiver as a RTK base at the same ti...
It??s interesting that there??s calibration baselines for checking total station distances, while many surveyors rely heavily on RTK (VRS/RTN even w...
Like I wrote, that wasn??t a dealer. That was Leica geosystems US tech support. It was a salesman working directly for their US company. Not sure whi...
Are you sure you didn??t have that 503_stk in there twice? The staked code when stored was rebar, but when you staked out another point called 503_st...
I could not tell what you were trying to illustrate in your videos, but if you are new to Trimble your frustration might not be glitches. And about th...
@norm ODOT has been using ORD for 2 or 3 years now. They are only updating ORD standards.?ÿ
Do you still use it? It does not save with every keystroke , partly because you can??t press a key for commands, but it can save every 3 seconds or d...
Rounded numbers? Probably not if they are old deeds. Older surveying used instruments with lower precision output compared to today?ÿ
