If you are running out of storage if you haven't already done it you can add a MicroSD card in a slot under the battery. We had a unit freeze up and ...
We use those often and over the years have found from 1 to 18 feet when we had a good ground point to check to. The worst I found was the golf course...
I can tell you that you will hate working with C3D survey figures, they are so clumsy I am betting that before you figure it out Acad will change the ...
> Figures (what civil calls the auto line work) are tough, no denying it. There are things that some really hate about them, mostly the fact that ...
You can explode them and get 3d polylines but I never saw much reason to do that when it is soooo easy in FTF.
I don't think you would be that happy using the C3D method, you will need to create a Fieldbook file, then after that C3D still creates survey objects...
Thanks guys, that is what I was hoping and will give it a try.
I believe the purpose of the ALTA Survey is to support the guarantee of clear title and identify boundary problems of the specific tract as describe...
Mike,We connect to a Leica 1200 GPS with Carlson but there is one catch. Carlson can receive the data from the Leica but it cannot control the GFU15 ...
In the early 70's we staked a college track that had just been resurfaced. First track meet many school records were broken, needless to say they had...
The Texas quads are in UTM meters but Penn is probably different. I could tell you how to do it in C3D but not sure how to query from one drawing to ...
This is not going to help your situation but our Surveyor Plus v2.61 locked up friday while taking an offset shot with our Topcon Robot QS. The data ...
In the old days (pre internet) we would buy the CDs and had a handy lisp routine to bring them into autocad.
We are using the Javad as an onsite "Base" but are transmitting corrections directly to the Internet using the internal CDMA modem. If we wanted we c...
We have a couple of Triumph 1's and are very happy with them. Instead of transmitting corrections over a uhf radio we went with the Javad internal CD...
When you "Explode" an object i.e. a point or bearing/distance that has the option to mask background enable it will separate the text from the mask an...
We find just exporting the points from Carlson to a csv file then import into Civil 3D is the simply way. We normally delete all points from the draw...
I have one of these and you get the added bonus of a 2TB harddrive wireless backup.
