Forgot about the gluing onto the back thing. Added a flat surface for the backing and it only added $3.50 or so in plastic

What I ended up with this weekend. It will be a bitch to fit, but, it will be strong and durable. I hate the 3D mouse on the computer this was scree...

Suit yourself of course, but, almost all of those comments had to do with using a balance charger vs. a PCB that does charge the individual cells or h...

Go LiPo, they are light as they don't have the metal casing and we need everything to be light. Find three that fit, get a PCB and a charger and if ne...

Watching TV this morning yielded the radio backing. I did offer it up on Shapeways, but, there are some hard to change parts on that portion. I will...

For anyone else trying LiPo to 12vFor anyone else trying LiPo to 12v, this is a great find. I measured the 360° draw at 175mA, so, this should work gr...

Any electronics guys here?Duh! What do you bet the radio has a regulator in it? I bet if I set one at 12.0 volts the thing will work perfect

Any electronics guys here?Finally got the correct switches in, so I am working on these 360° batteries and I have found a problem. Connecting straigh...

Thanks for that and it follows what I expected looking at the design. My guess is that it takes a chunk out of the radio back, ripping the screw area...

I actually just fully read what you said or I glossed over it before, sorry. I have never had a case break, but, in looking at the clip I had decided...

Spent some time and finished the kit. 22 pieces as I added another leg screw in case one was lost. Making the print girdle was the just as bad as th...

Got a wild hair (no pun intended) and started a GST-20 tripod last night. I am almost done, but, this is going to be very awesome if it works (21 pie...

I have changed the way I am doing these now and I am using a push nut for the tooth and printing them in plastic. I should have something soon

I think you can find one, but, I did look at pictures on line and it would be fairly easy to print

Is it something that can be easily printed? Just a thought

Nathan, I was thinking about your broken site that they sent you broken. You could have complained to them for a replacement, but, I doubt they even ...

Very nice condition, congrats!

Thank you, I had a suspicion that it was all still the same.

Well the bigger battery is working so well, I am doing a pole mounted one for the 360° prism. I have made slide in ports for the wire upwards and a c...