I would knock out a printable case / charger for you if I still had one of those batteries, but, I don't. Email me if you don't find anything.

Never posted a finished picture. It works perfect and yes I added a tongue on the bottom so it could not be installed backwards:-D

We also do a lot of floor level type surveys with a scanner. It is much easier and faster

Yes, leave a trail! The fact that he would then match the original corners, so much the better

My 2 cents. The division is by area, but, anyone's guess as too alignment. It sounds like your answer is going to be an area solution that closely m...

Long time hater, first time poster.

Old case sitting on shelf = $03 LiPo's 2.0 amp = $23.97Old speaker wire = $0PCB = $6.053S Smart charger = $24.95 (I don't have as many chargers as bat...

Thank you for this post as I would have used semichrome. We do kind of need a DIY area

To beat this to death, this is a link where I posted to add a regulator and a off / on switch after the PCB was already wired. The only thing I do di...

I was just getting the old mothballed stuff up and useful. I actually never intended on coming up with my own battery system, but, I found it kind of...

For anyone else trying LiPo to 12vTo close this line of thinking the little, and I do mean Little, regulator works perfectly. It bench tested a solid...

To be on the safe side I am adding some charging cases and bags to what I am doing. andwill be used in conjunction with my metal shelves and isolation...

It is for Geodimeter / Trimble Hirosi ports. Really any cable can come out of it, but, these are Geodimeter/Trimble

Thanks Jim. I feel like I am a hack now that I can't see, LOL

There are times you start something and you should just stop, but, you are just too far into to just stop. I have had issues with the wrong part, par...