Have you checked if 1 is international foot and the other US survey feet?

What does it matter?????It might have been, but it was 40 years ago and my memory is not what it use to be. I will have to pull my old head hard drive...

What does it matter?????I used an old Dietzgen in the early 70's that had 2 focus knobs on top. One to get close and a second one at back of the scope...

Thanks Jon,We had been using a Range 200 C and TDS Survey Pro. After the big buy-out of smaller companys by Trimble we have wanted to try a FC-2500 wi...

I have had good luck on manholes (did a check with TS)using 15 min. static and post processed. I had 1 bad point out of 64 and it failed in post proce...

Surveyors practice spacial measurements?

pure fiction all the way but it was entertaining

I think NC A & T has or is working on one. They have a Geomatics Degree.NCAT.edu

SORRY!under wrong area/Down the hyper manuals and read them. Basicly set up the receiver and collect data. Down load the data and post process the dat...

We have used Topcon Hyper + GPS with Topcon Tools post processing for over 7 years and have never had to pay to upgrade firmware or Topcon Tools (vers...

Try the setvar "pickadd". Set to 1

Daryl,You need to make a Heinken commercial. You are the most interesting Surveyor in the world. You could say" I don't always use GPS, but when I do ...

3 violations of board rules in NC1. Failing to protect the public. (Town and HOA)2. Not doing proper research.3. Creating an overlap. There may be mor...

1. NO. I have always been told "If it can't be layed out by an average surveyor then it is void2. MABY. 3. MABY

NOT TO HIJACK butWe had our 35w radio narrow banded to beat the rush. Topcon and our Dealer are now trying to get our Hiper + to work with it. I sure ...

Mark,You are right about that. In my 40 year run I had to move on to move up. I think I will finish up here.