I regularly use a 1" TS15/CS15 and 3" TS16/CS20. Assuming the TS15 and TS13 are pretty similar from appearance/spec but hopefully your dealer can give...

@keithscadservices Smartworx was first generation, drove 1200 series robots and GNSS. Smartworx Viva was second generation and drives TS15 robot...

@jph Wholly disagree, great for both, it's just not Surveying for Dummies like with Trimble where is simple for anyone to pick up. Drives the Leica...

@bstrand It's the idiot/inference factor I'm more concerned about than legs settling (unless your on tar on a hot day). Has a crew member cut corner...

By always facing north and bubble on rod facing the same my relative is better my absolute would have a systematic error. Sure all rover points wil...

@michigan-left We are an observation based cadastre with (I think) standard hierarchy of evidence (natural boundaries, original monuments, undispute...

I'm holding that advice for eternity Just make sure you inflation adjust We had one old boy who until his recent retirement was charging rates f...

Need to preface this with some more details it seems. First I'm in New Zealand not USA and for boundary work we prepare a survey sheet and a title sh...

What are you doing with the "rotated shot" and second round of observations? Are you just averaging your point? If it's topo use the point averaging...

@rover83 Geomax, but I don't recall ever doing it with Lecia either, only Trimble. Hardly anyone here buys TBC or Infinity though. Raw observations...

@pfirmst Wow that sounds like a cool job! When your doing week long static do you have mains supply to the receiver? I know the Trimble Zeph...

@jitterboogie And if you really are after mm it's usually over a short distance and you need quality total station and fixed stave with level.

@350rocketmike Theseare the difference between a ute (next size down from a F150) and the small SUV I work out of. With RTK GNSS and a robot I o...

If your rod is out of plumb (which is the only reason why you'd want to do this to begin with) No, I find all poles have some degree of banana/run-...

@stephen-ward They also snag up in the storage bag worse than washer style too.

@oldpacer Personally for GNSS unless I'm doing static the spade plus a brace stick/stake same length as the spade (what I thing you guys call lath?)...

@steinhoff Unless you get a bad initialisation, then breaking them up would be more reliable assuming resetting RTK 'fix' (or the equivalent from so...

Leica has nothing to do with Trimble. That is a mis-statement. You didn't read that correctly. Apologies for the long text in brackets but if you r...

@keithscadservices The screaming deal on a Lecia 1200 looks like buying a Geomax zoom 95 (the same thing) and then use XPAD which is super easy for ...

Can I ask why you are comparing Leica to Topcon robots? I've mostly used Leica and a little Trimble plus comments I've read on here indicate those...