They still be could for static. Odd that both are bad.

Perhaps it is SurveyPro? Some software require a Legacy module or OAF. Did your dealer try using Topcon Software such as Magnet??ÿ

True, but that is like saying AutoCAD can't open an XML file. Civil3d is to AutoCAD as InRoads is to Microstation. Microstation and AutoCAD are the me...

What is that suppose to mean? BENTLEY InRoads, which runs on MicroStation can import a surface from XML.

For small site projects reverse engineering from contours and spot grades is the only way to create a surface. Building appropriate break lines, check...

That is common today on low budget jobs, limited engineering. Most if today's contract plans are for planning board approval only. An accurate 3d surf...

Don't over think, if you do, you are bound to create error. Just apply the combined scale factor in your data controller. It will apply the CSF to all...

LandXML was developed just for this purpose, to share data between applications. So use it. You can save the surfaces, alignments and points to LandXM...

Drone deploy charges $249 per month with annual commitment, or $399 per month to month, plus $49 per map when using GCP's.

Wow, if you are asking about scaling your orthorectified aerial imagery, then something is wrong. ?ÿ With proper GCP's and good survey techniques, you...

You need know the direction of your scale factor. Is that scale factor ground to grid? If yes, then your ground distance is longer than the grid dista...

In Magnet Field you can layout a polyline, with a reference line at the same time. The reference line may need to be an alignment?ÿ

Aaron, It sounds like you are looking at the default setup and/or reports from Magnet Tools. You can customize these fields to your own preference. In...

More important than pixel numbers are sensor size and shutter type, along with a good Gimbel. The 4 Pro has a 1-inch sensor and a mechanical shutter. ...

Devo, Perhaps demo each Trimble and Topcon.?ÿMost areas have a local vendor that people prefer because?ÿthe vendor can properly support the product. T...

For anchors, I would NOT want to carry a standard prism pole with a prism mounted at the bottom. For one the bubble is too high when the measurement i...

It is a combination of the Seco 6000 with a RAM Ball mount to standard 1 1/4" prism pole. I have 3d printed plastic adapters to make the pole clamp fi...

Request a 30-day demo from your Topcon dealer.

AdirPro is branded and exclusively sold by Tiger Supplies. They stand behind there products.?ÿ

Magnet Office Tools is very powerful, while very easy to use. You can view and edit all raw data. If you are handy with programming and Microsoft Acce...