Last seen: March 10, 2026 1:01 pm
> Ladd. How do I get that keyboard.For the sake of the thread:
> > I did some testing tonight to see if I could replicate the problem (and I believe I possibly did). Here are my results:> > > > &...
I did some testing tonight to see if I could replicate the problem (and I believe I possibly did). Here are my results: Carlson SurvPC with Superviso...
> There are a couple of Recons w/ Carlson Surv CE on eBay. Claims to have robotic module...Due to a recent increase in fraudulent licenses of Carls...
> Now you are ready to take that last corner shot that you want to make close on the first shot. Code it:> BC JPN(the point number of the first ...
> I am having trouble licensing it although I just purchased it online.I'm just getting back from a week of vacation with my family but have dispat...
Neil pretty much nailed it. I've not found an easy way to create a custom toolbar in IntelliCAD of Carlson commands and icons and have asked either th...
Another suggestion (one that I'd typically use only with point-only LIDAR data) is the "Simplify Surface" toggle found on the Triangulate tab:In this ...
ArcGIS for AutoCAD (I've not used it) might prove useful.
No joyIn the Station Polyline/Centerline dialog box, issue the Save Settings command and send the resulting STA file (and the CL file) to my attention...
I tried test test this last night but couldn't get the Radians result. Can you send me the exact sequence of steps of example input and where/how you ...
> I assume my old key will work (I was told it would) but would prefer confirmation before I take the plunge.Presuming the hardware/operating syste...
I don't know if NCOPY has ever been developed for IntelliCAD but I have logged the request with our development team. Until NCOPY is available, you co...
It could be the PLINEGEN variable (set it to 1):>Command: PLINEGEN>Enter new value for PLINEGEN : 1>Command:For existing polylines, you can u...
For posterity with searches that find this thread, follow-up information is/was posted at [msg]237009[/msg].
One option you could try (for diagnosis details) would be to send the plot to PDF and then print/plot the PDF. I don't have any experience with the Ep...
If you'd care to send me an example file (lnelsonATcarlsonswDOTcom), I'll see what my results are and will report any anomalies to the Carlson program...
Check out the discussions at the [msg=200149]Insertion units??[/msg] and [msg=141543]"feet" in CAD[/msg] threads.