Will do - Thanks.
> > At 1.5m HI, reading 10cm from the axis of the instrument, you'll actually read 1.503m.Thanks for this easy to remember tip.
Regardless of the brand, I think if a person takes good care of equipment and follow manufacturer's recommendations (and read the user's manual from f...
I personnaly prefer Carlson Civil Suite (4 modules: Civil, Survey, Hydro, GIS) running on AutoCAD. Very complete set-up.
To reach a comfortable cruising pace, you will need to allocate resources: time and money. Are you sure that it is the right software for your needs? ...
Indeed, those are good questions. Let's find out, let's keep our minds open.When Leica came up with the technology of "don't worry if your cross-hairs...
Or maybe he is a very good mechanic who knew the limits of the machine when performed the test? Don't ask me, I don't know. Myself, I know very little...
The stobe light was originally installed at the Ford Dealership. They outfitted a lot of trucks with strobe lights over the years. I suspect they have...
...CE model. They still service the more recent units: CX and MX.(just to expand)
I would think that most later-released units are PPK capable with Survey Controller = < V7.2. Some of the units could also be RTK capable if the op...
I personnaly prefer to log on the receiver. Any unexpected break in communication between the controller and the receiver will stop the recording. Plu...
Many of the USB to serial adaptors do not create true serial ports, which may create connectivity problems when using those "legacy" devices. One solu...
Thanks for the information - cheers:good:
> You can get the scale factors for any point(s). Under Reports Select "Points List". But first at the bottom of Reports there is a "Report Optio...
You should use it as your new avatar.
I think what they mean is that deal is only valid until that date. After that deadline, if a customer is not under any type of plan, that person will ...
> Leica understands, Jacobs said, that “scanners are still young enough in their life that there’s not exactly a factory around every corner” and “...