Last seen: November 6, 2024 4:17 am
R/W monument vs water line.
Since your staying at New York New York, take a ride on that roller coaster on top of it. I got talked into that back in March.Be sure to catch the B...
Not a 1000 rpm pto shaft. It would have a groove around it with splines on either side of the groove for a sliding pin to lock the equipment shaft ont...
Would have been much easier if that thistle would have been fully grown.
muncle56, post: 430635, member: 8893 wrote: My predecessor here (who is unreachable) provided the horizontal and vertical control for a 2,000 acre par...
I learned in the big ice storm we had in 2009 to keep plenty of cash on hand and in your pocket. Power here was off 21 days, for a few days you could...
White Birch maybe?
Our Aussie keeps a ready supply of deer skulls and legs, bird carcasses, rabbit heads, squirrel tails, pork chop bones, dead raccoons and groundhogs, ...
I've never seen a wooden gate 18' wide. Don't see how it would ever keep from sagging or drooping from the weight of the wood. If the hinges were mo...
I've seen some like that where the pipe had been broken off at the ground and somebody stuck that end in beside the bottom.
I have an arrangement with the local large earthwork/paving contractor and do 99% construction with an occasional boundary survey if the guy that owns...
I thnk you've misspelled it. It's the French word Fuquaruie. As in "where the Fuquaruie"?
FL/GA PLS., post: 426353, member: 379 wrote: I was at the Daytona 500 when Sr met his demise. He was in third place blocking Sterling Marlin from catc...
3 of us were heading back to the office from Paducah after a heavy rainstorm. We rounded a curve and there was a small station wagon sitting crossway...
How can he order a survey of property he doesn't own? Only way I know of would be if the adjoining owners agree to the deal.I got hung on one like th...
I fixed it the other day when I found it by shooting a couple of pins on the site I had included in he topo. Shot them with a different controller wi...
The only way I see to add or remove the geoid is to change the coord system in the properties settings. I tried changing the coordinate system to Ky ...
MightyMoe, post: 425051, member: 700 wrote: Did you do the calibration using static observations for the control points? 3 minute rtk observations.
