The best way to work thru this is for you to send me your raw data. My email is donnels@bellsouth.net, or call me at 919-469-8336, or better yet send ...
Related Question for the Resident GeodesistsI also have wondered about this. Based on my google searches, it appears to me that Move3 is the only grou...
I'm a little confused on your question. Are you using GPS vectors or are you just using RTK points, or vectors derived from RTK?. Either way the progr...
Though I currently have no formal connection to Carlson or Carlson SurvNet, I am always glad to help fellow NC surveyors. Feel free to shoot me an ema...
Well, what I said above is true if you are using the 2d/1d model. If you are combining total station and GPS vectors you are using the 3D model, which...
It absolutely reduces TS measurements to grid based on the algorithms and formulas found in James Stem's NGS Manual, "State Plane Coordinate System of...
Go to the following linkNC Sample PlatThis shows the example plat that the board produced as an example of a plat that meets NC standards. Notice that...
As stated, my memory is fuzzy. It may have been Wake and Johnston County that had already been largely granted by the Rev. War as they were the counti...
The land grants (copies) are available from the State archives in Raleigh. Several years ago I arranged a seminar presented by the archives staff for ...
Carlson's SurvNet has an EDM Calibration program, but input is hand-entered, not read from a data collector file. So Carlson is 50% there. It would ta...
I have not played with the point renumbering, merging ability in TT. When I have time I will take a look at that. Since you mentioned traverse data I ...
I've recently had a little experience using TT, but not with total station data. I was processing GPS data with TT, then exporting the GPS vectors fro...
A summaryTommy can add to my comment if he wants and is still paying attention. Tommy got his project to process. I had a bit of problem helping him a...
Glad to help when I can. I do not post much, but lurk a couple of times a day if I'm in the office.
Send it to me. Include the .prj file and raw data files. I'll look at it as soon as I can.donnels@bellsouth.netDonnie Stallings
RAW, SurvNetBig Al:If you want to you can send me a copy of your RAW file and a brief description of your survey and I can probably help. I have lot's...
I used to be proficient with Geopak Survey, but have not used it for several years. For full disclosure I was an employee of Geopak. Following are my ...
I would suggest you you try Xport again to convert the RAW format to RW5 format. We can then look at the resulting RW5 file and see what needs to be d...
Dave:SurvNet does accept GPS vectors in StarNet format. I like the StarNet GPS format as its simple and ASCII. If I collect vectors with my GPS equipm...
C.If you have any questions in regards to getting going with SurvNet feel free to email me, donnels@bellsouth.net. I hope this does not violate board ...
