I second this. Differences of 20cm seem huge, for either RTK-vs-redundant RTK or RTK-vs-conventional, certainly way out of tolerance for most of the ...

Have you turned autolock off and tried a few sets manually between fixed objects (not prisms)? Do the F1 & F2 angles check OK?

The S6 has an internal barometer, which you can select to use at the initial "Corrections" screen in Station Setup.

Just a few things off the top of my head: When you do the collimation adjustments, do you do them all? (HA/VA, trunnion, autolock) Are you sure you...

Tripod type with a robot is very important. Not sure if you were using a robot before, but if you are now using a robot on a standard tripod you may ...

The converter on the collector can only handle smaller sized job files. I don't remember what the upper limit is, but once your job file gets too lar...

> The other issue is that the Trimble 360 prism has an offset to it when it's being used; look through your objective and you'll see that it's poin...

Are you using a projection?Kevin's first two lines here are what I am curious about.

Do you know what the maximum "allowed" vertical angle sighting is?

I am very interested to see how your tests turn out

> Okay, when I'm wrong, I'm wrong.I don't recall ever seeing those words typed in the comment field after that user name. Ever. 😀 I'm actually a...

How do you have your SPSO projection/coordinate system set up? Did you set up your project as "Scale Only", or are you working in State Plane/LDP/etc...

NAD 83(20##)A quick (very quick) perusal of the Ten Year Plan doesn't reveal any date for readjustment. Looks like 2022 is the target for a new refer...

Sounds to me that the deed, which is guide to lead to you what was done on the ground, got you close enough to find the pipe. Any reason to believe t...

Not sure if it works, but did you try selecting the alignment only in the project explorer then exporting as a LandXML file?

I am currently running v3.30 and they do not show up there either.FWIW, I always get an error message along the lines of "Invalid antenna specified" w...

I am by no means a TEQC master, so I don't know of a more automated way to do it. I use the following:teqc -st yymmddhhmmss -e yymmddhhmmss filename....

You can chop up that file using Trimble Grid Factory. It lets you graphically select the area you want so you can make a much smaller file.

Does your deed reference any other "Covenants and Restrictions" that may have been filed after the map was recorded?As others have said, if it appears...