LEICA TCP1100 and modern controller?

I have a Circa 1999 TCP 1100 robotic Total Station  (tcra 1103 z) with TDS on board connected to a TCPS 26B spread Spectrum Radio that is controlled by a RC1100. Looking for a way to run it from a modern data collector.... possibly by adding a spread Spectrum Radio to a suitable Collector

I also use a CS15 controller with GS14 receivers..with Carson Survce and Leica smartworxs.. but the only way I'm able to operate the tcp1100 is manually using Carlson software. Not sure if there's a way of adding a similar spread Spectrum Radio to that to communicate with the robot radio... or replace the the radio on the robot?

I sometimes use the robot with rc1100 over long distances such as a half a mile or more traversing and am hesitant to use Bluetooth ..which I'm told is only good to about a thousand feet or so ,which is great for construction staking, but not for my work.

Any thoughts? 

Thank you
Ken H MN Licensed LS 18890