Hi Everyone,
I purchased a used Leica TCRP 1201 Robotic gun with an Allegro CX data collector running Carlson Software V 1.64. I can get the internal radio in the DC to talk to the handle. I am looking for literature on line but I can't seem to find it. Any help would be greatly appreciated.
Thanks in Advance
DHtech,
I have a few quick guides from Leica for this combination for getting the communications working and the current version of the RM Config Tool that runs on the Allegro. You described that you already have this working but I can email you the guides if you want them.
Is the information you need about the Leica TCRP 1201 or Carlson SurvCE. I can help with the specifics on the Leica options which tie into the options in Carlson.
Email me if you want the guides I have and if you have any questions on the TCRP1202 I will be glad to answer them.
Hi Mark,
Thank you so much for the quick reply. We ended up figuring it out. The radio configuration was messed with before we got out there so they wouldn't talk. We figured out the setting that was changed (RCS). They are working seemlessly as they were before. I stand by the qoute " Usually the biggest issue with an instrument is the person standing 1 foot behind it"
Thanks
DHtech,
Just let me know if you have any questions about the instrument and how the settings relate to Carlson. There were a ton of these combinations out there at one time. I usually try to watch the site and answer the Leica issues that I can.